Digital Multimeters (DMMs) and Precision DC Sources

cancel
Showing results for 
Search instead for 
Did you mean: 

4070 max settlling time?

Hi.  I wanted to know how I can determine or where I can find the Maximum settling time that I can set for the DMM 4070. 

Thanks in advance.
 
 
0 Kudos
Message 1 of 5
(7,680 Views)

Guy04,

 

Typical settling times are much less than one second however the attribute will allow up to 149s. Refer to the NI-DMM help file for the measurement defaults of the 4070 for more specific settling times for each mode. Hope this helps.

 

Shea C 

0 Kudos
Message 2 of 5
(7,669 Views)

Shea,

I tried to look for this specification in the DMM help file under the Devices->4070 tab and I couldnot find where it states the 149s value.  Can you please guide me to where this is specified. 

Thanks,

Guy04

0 Kudos
Message 3 of 5
(7,668 Views)

Guy,

 

The location that I refered you to states only the settling time defaults and not the maximum settling time. I verified this time myself however using the driver. The location that I spoke of in the previous post can be found at NI Digital Multimeters Help>>Devices>>NI 4070>>DMM Measurements>>DMM Measurement Defaults

Shea C

0 Kudos
Message 4 of 5
(7,661 Views)
Ok.  Thank you for your help.
0 Kudos
Message 5 of 5
(7,657 Views)