Digital Multimeters (DMMs) and Precision DC Sources

cancel
Showing results for 
Search instead for 
Did you mean: 

4070 To measure high voltage

Hello,

 

I am using a negative ion generator (few walts output, high voltage, low current output)which can produce around -5kv to charge a big capacitor. I want to detect the current(mA level) flow into the capacitor. Two ways to do this:

First, use 4070 as currentmeter in series and detect the current. 

Second, use 4070 as voltagemeter, put two resistor within the circuit and measure the voltage drop on the small resistor (should be less than 1 V)

As either way I am still connect 4070 with -5kV, I don't want to destroy the equipment. 

Does anyone see any problem there might be or any suggestion?

 

Cheers,

Danny

0 Kudos
Message 1 of 2
(5,730 Views)

I'd setup to use the DMM as an Ameter.  The key here is to put the meter in the path as close to "ground" as possible.


GCentral
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines
"Not that we are sufficient in ourselves to claim anything as coming from us, but our sufficiency is from God" - 2 Corinthians 3:5
Message 2 of 2
(5,725 Views)