Digital I/O

cancel
Showing results for 
Search instead for 
Did you mean: 

digital I/O with USB-6259

We have a UBS-6295 DAQ and a BNC adaptor for E/M/S serious called BNC-2110. 

We have a force measurement device which sends 8 channels of digital signals and I tried to use the digital input of the DAQ through this BNC-2110. I tried to define a digitan input in MAX but I have enounterd errors indicating the timing. I think I have a problem with Advanced Timing. I have to admit that I am very naive in electronics. Can anybody walk me through the steps of defining DI channels for this DAQ on MAX and what settings I have to have for Configuration and Advanced Timing.

Any help is greatly appreciated. 

0 Kudos
Message 1 of 2
(4,058 Views)

Hi,

 

You can take a look to the link below that is exactly the example that you need,

 

http://www.ni.com/gettingstarted/setuphardware/dataacquisition/digitalinput.htm

 

Also for advanced information about timing please check this other:

 

http://zone.ni.com/wv/app/doc/p/id/wv-270

 

Regards,

 

MCOTO

0 Kudos
Message 2 of 2
(4,039 Views)