Digital I/O

cancel
Showing results for 
Search instead for 
Did you mean: 

USB-6366 Digitail input ports

Solved!
Go to solution

Hi,

I am trying to input Digital 12bit data(5V TTL) into USB-6366(BNC Model).

According to specification, PFI 0-11 can be utilized. However connector shape are BNC and another ports. It is not convenient. If P0.0 - P0.7 and PFI 8-11 could be utilized, it would be great. Is it possible to do such connection ?

 

6366pin.PNG

0 Kudos
Message 1 of 6
(2,412 Views)

Hi KevWhat

 

You only can use 2 additional BNC terminal using User 1 and User 2 connectors.

 

USB-6366 BNC has 24 digital I/O lines (3 port = 8 lines).  The Digital and Timing I/O BNC connectors are only routed Port 1(P1.0 - P1.7). If you connect User 1 and User 2 to any terminals in Screw terminals, They are routed User Access BNC connectors.

0 Kudos
Message 2 of 6
(2,378 Views)

Hi Ueno,

 

Thank you for giving your comment.

 

Bottom line may be "Screw terminals can not utilize as Digital Input". I expect.
But I don't understand the detail what you explained for Language Barrier.

>If you connect User 1 and User 2 to any terminals in Screw terminals, They are routed User Access BNC connectors.
-> Could you explain the detail? You mean USER1,USER2 BNC ports can be utilized as Digital Input(like D8,D9?).

Best,

0 Kudos
Message 3 of 6
(2,372 Views)

I am sorry for the lack of explanation.

 

Yes, USER1,USER2 BNC ports can be utilized as Digital Input. For example, User 1 screw terminal connects P0.0 screw terminal, User 1 BNC terminal will be P0.0.

 

If you don't use User 1 and User 2 terminals, you only can use Port 0 (P0.0 - P0.7) and Port 2 (P2.0 - P2.7) in the screw terminals.

0 Kudos
Message 4 of 6
(2,368 Views)
Solution
Accepted by topic author KevWhat

Hi,

I understood USER1, USER2 BNC are "Blank Ports", thus we can assign another signal on screw terminal. It make sense.

>you only can use Port 0 (P0.0 - P0.7) and Port 2 (P2.0 - P2.7) in the screw terminals.
-> It looks, I can utilize these ports as Digital 11bit input. I will try.

Thanks,

0 Kudos
Message 5 of 6
(2,363 Views)

It's my pleasure. If you have any questions, please post again.

0 Kudos
Message 6 of 6
(2,358 Views)