Digital I/O

cancel
Showing results for 
Search instead for 
Did you mean: 

Time out error when trying to calibrate a PXI-6552 using Calibration Executive.

Solved!
Go to solution
I'm getting an error I've never seen before when trying to calibrate a PXI-6552 using Calibration Executive. We have been calibrating these cards for 3 years and never had a problem. The error I am getting has to do with the HP 3458A DMM taking a reading.

Error -1074126845 occurred at IviDMM Read.vi at step Verify Generation Voltage
Possible reasons: Driver Status (Hex 0xBFFA2003)Max time exceeded before operation completed.
Primary Error: (Hex 0xBFFF0015)Timeout expired before operation completed.

As soon as Cal Exec sets up the PXI-6552 then goes to take a reading from the 3458A an SRQ message appears on the 3458A, then the above error message pops up in Cal Exec. I've tried re-installing the NI-DMM drivers. The voltage on the DMM display is good for the first step (5.5 volts DC) but it times out and gives me the error as stated.
0 Kudos
Message 1 of 2
(3,196 Views)
Solution
Accepted by topic author Rick Gill
Nevermind, I got latest drivers and installed them and everything is working fine now.
0 Kudos
Message 2 of 2
(3,187 Views)