Digital I/O

cancel
Showing results for 
Search instead for 
Did you mean: 

Question about PXI-6562 pin flipping

Solved!
Go to solution

I have a PXI-6562 card with the cable that has the note.

 

 

Note  If you design a custom cabling solution with connector (779157-01) and cable (192744-01), the NI 656x pinout is reversed at the end connector. For example, the signal shown on pin 1 shown in the previous figure would map to pin 73 at the end connector.

 

Pin 1 flips to Pin 73, but what about the pairs?

 

Does Pin 2 flip to 72 or 71?

0 Kudos
Message 1 of 3
(3,432 Views)

Hi Steve,

 

Going off of the NI Digital Waveform Generator/Analyzer Getting Started Guide, look at Figure 15 for the custom cable connector solution pin out, which is reversed from the normal pinout on Figure 14.  All pins are reversed.

Kyle A.
National Instruments
Senior Applications Engineer
0 Kudos
Message 2 of 3
(3,408 Views)
Solution
Accepted by topic author Steve_Block

1 - 73

2 - 72

.....

73 - 1

 

All signals pin numbers add up to 74


"Should be" isn't "Is" -Jay
0 Kudos
Message 3 of 3
(3,407 Views)