Digital I/O

cancel
Showing results for 
Search instead for 
Did you mean: 

Problem in Acquisition with PXI-6551

Hello,

 

I am trying to generate and acquire data between channels on PXI-6551 card. I am using the demo VI "Dynamic Generation and Acquisition-Source Synchronous". I am able to generate waveforms ( I can see on scope) but can't acquire anything. I connected PFI1 to PFI2 and CLK OUT to STROBE as mentioned in the instructions. I connected DIO0 to DIO8 and DIO7 to DIO15 but I only receive zeros.

 

Anything that I could be missing ?

 

Thanks,

Mayank

0 Kudos
Message 1 of 3
(2,173 Views)

It looks like there are values being generated over channels 0-7, If you try to connect other channels in the 8-15 range to the generation channels, do you still see no data?

0 Kudos
Message 2 of 3
(2,134 Views)

Yes, no data is acquired on connecting 0 to 7 and 8 to 15. I haven't connected the other channels yet. If I disconnect the strobe-clk and PFI1-PFI2 connection the VI doesn't run, so the problem probably isn't in the connection.

 

0 Kudos
Message 3 of 3
(2,128 Views)