Digital I/O

cancel
Showing results for 
Search instead for 
Did you mean: 

NIMAX simulating a device for Non NI application

I am currently developing a .Net application for my company that required the use of USB6525 Dig I/O.
I am awaiting delivery of NEw USB6525s from NI so thought I could simulate them in NIMAX for the .Net App to be able to use whilst being set up.
This does not seem to be possible as I am unable to toggle inputs or display outputs through NIMAX for the .Net App to be able to see.
As soon as I run a task or start the "test Panels" of a simulated device the .Net App is locked out of the device by NIMAX.
Any ideas how to allow the .Net App to access the simulated device and allow I/O simulation via NIMAX ?
( NIDAQMX 19.6 & associated NIMAX)

0 Kudos
Message 1 of 2
(1,713 Views)

Hi @PeterGillham

 

Have you seen this link below?

https://knowledge.ni.com/KnowledgeArticleDetails?id=kA00Z0000019Nw0SAE&l=en-GB

 

It seems you are running into a limitation as the device is reserved when running test panels. 

 

Kind Regards,
 
Danielle 
Technical Support Engineer
Platforms & Systems
National Instruments
 
0 Kudos
Message 2 of 2
(1,645 Views)