Digital I/O

Showing results for 
Search instead for 
Did you mean: 

NI PXIe-6556 (HSDIO) configure for High speed MIPI interface



I am having issues when we want to increase MIPI frequency to 2.1 spec of 52MHz.


Our interface uses soft dock with 6ft long cable from the PXIe Card. When we connect Oscilloscope we see that we are getting data but that is delayed by 3/4 cycles (of sample clock) . 

Ideally I would like to configure data acquisition with certain delay from falling edge of SCLK line. But the configure VI allows us to only configure delays from on board strobe or on board sample clock.


Is there any work around for this problem?

0 Kudos
Message 1 of 2

+ +


Bumping Up.....

0 Kudos
Message 2 of 2