Digital I/O

cancel
Showing results for 
Search instead for 
Did you mean: 

NI 9482 minimum current rating

 Hello,

I have an application with two signals to be switched:
1.2-1.8A 18V
<1mA 3,3V (logic input with a 10k pull-down).

I would like to use a single device for both signals and NI 9482 meets the higher-current requirements, but it has no specification of minimum current nor details about relays or their contacts. Can I use this module? If not, what module could I use? I can use either CompactDAQ or USB interface devices.

 

Thank you.

0 Kudos
Message 1 of 3
(2,600 Views)

Hey Paulius,

 

There doesn't seem to be a minimum for the relays. https://knowledge.ni.com/KnowledgeArticleDetails?id=kA00Z000000kFOySAM 

 

However for best advise i recommend contact your local NI sales department directly. The engineers there will be able to help you in choosing appropriate hardware.

 

http://www.ni.com/contact-us/en-gb

 

Best,

-Jelmer

0 Kudos
Message 2 of 3
(2,571 Views)

Hi Jelmer,

Thank you for replying. Your link has a white-space stuck to it. Fixed link.

The article concerns reed relays while the device I am asking about has electromechanical. Depending on contact material and relay design, the answer might be different.

I took your advice and sent a message to sales and will update the topic when they reply.

0 Kudos
Message 3 of 3
(2,568 Views)