Digital I/O

cancel
Showing results for 
Search instead for 
Did you mean: 

NI 9236 Dehnungsmessung

Ich möchte Dehnungen bzw. Spannungen eines Objekts mittels DMS messen und habe die NI 9236 Module sowie die cDAQ 9178 bzw. 9174 zur

Verfügung. Eine generelle Frage: Kann ich meine DMS/Rosetten direkt an das Modul anschließen oder muss ich diese zuvor in einer

(Viertel-)Brückenschaltung (inkl. externer Spannungsquelle) verschalten und so an das Modul anschließen?

 

 

0 Kudos
Message 1 of 3
(5,306 Views)

I want to measure strains of an object by strain gauges. For that, I have to use the NI 9236 modules and the cDAQ 9178 or 9174.

 

A general question: Can I connect my strain gauges / resistance strain gauges rosettes directly to the module (by the wires) or do I need before a (quarter) bridge circuit (including external voltage source) interconnection and connect that to the module? 

Thank you

0 Kudos
Message 2 of 3
(5,295 Views)

Hi,

 

you can connect quarter-bridge sensors directly to the module as it provides a quarter bridge completion on each channel.

 

You can also find this information on page 7 of the manual:

http://www.ni.com/pdf/manuals/374645a.pdf

 

This paper could be also helpful for your application:

http://www.ni.com/white-paper/3642/en

 

 

Best regards, Hendrik

0 Kudos
Message 3 of 3
(5,272 Views)