Digital I/O

cancel
Showing results for 
Search instead for 
Did you mean: 

How do I generate a digital pulse on a specified line?

Hello h@il,

Here is a screenshot of the Traditional NI-DAQ functions you need to use to use the 80 MHz timebase with "pulse" output behavior:



I hope this helps!

Best regards,

Message Edited by Jarrod B. on 11-14-2006 03:10 PM

0 Kudos
Message 11 of 15
(2,525 Views)
Hi guys,

I'm trying to generate arbitrary digital pulse signals using a DAQ card, which I believe is PCIe-6259. I can't get it done using the digital output function in SignalExpress, and the problem is I have to generate 30 different arbitrary digital output pulse train at the same time. Can anybody please give me any advice? Thanks in advance!

Jerry
0 Kudos
Message 12 of 15
(2,318 Views)
Hi Jerry,
 
We try to keep questions to one thread to help our customers better search our forums for answers.  I have responded to this question on your other forum thread.  It can be found here. Thank you!
Regards,
Vanessa L.
Applications Engineer
National Instruments
0 Kudos
Message 13 of 15
(2,304 Views)

Hello,

I think this belongs to this topic, so I will just go on here.

Following a simplified short version of my concern:

 

I have a very old stepper motor controller which makes one step movement, each time when I shorten two certain input wires (0V = logic true). If those are not shortened  I messure a voltage of 13 V between those.. 

 

Hardwareissue:

How can I use one of the Digital I/O ports of my NI PCI 6023e card to do a pulsed "shortening". I think the logic false (HIGH Voltage) of those Cards is 5 Volts. Will it give problems if I just hook it up to it? Or do I need to attach a resistor or something?

 

Softwareissue:

I need a pulserate about 100 Hz but I want to be able to change this frequency in real-time (10-100 Hz). 

We have Labview 7.1 here. I would like to avoid the DAQmx and use the traditional legacy. And I already have four of the eight Digital I/Os in use.

 

Thanks a lot

Message Edited by Andband on 01-20-2010 08:21 AM
Message Edited by Andband on 01-20-2010 08:23 AM
Message Edited by Andband on 01-20-2010 08:24 AM
0 Kudos
Message 14 of 15
(1,837 Views)

Ok, shall I start a new thread after all or did I fail to express my problem or are you just not knowing ? Whatever it is, it would really help me, if you say it. 🙂

Thanks

 

Message Edited by Andband on 01-21-2010 03:40 PM
0 Kudos
Message 15 of 15
(1,814 Views)