Digital I/O

cancel
Showing results for 
Search instead for 
Did you mean: 

High Frequncy Gate driver Signal

Solved!
Go to solution

Please be kind enough to teach me how to how make 13.56MHz gate driver signal using myRIO-1900

0 Kudos
Message 1 of 3
(2,060 Views)
Solution
Accepted by sithum

Hey, 

 

Are you familiar with our FPGA programming? What specifically are you trying to program? What kinds of inputs are you expecting from your IC?

 

0 Kudos
Message 2 of 3
(2,023 Views)

Thank you for your reply on this matter.

I am not familiar about NI FPGA Programming.  My Laboratory is a Power Electronic Laboratory in my University. I brought MyRIO-1900 to introduce to my Laboratory for all the power electronic experiment in our laboratory. Our Laboratory use Gate Driver Signal Frequency from 10kHz to 30MHz. In my research, I want to design a PWM signal with 13.56MHZ to drive the GaN device in the Full-Bridge Inverter. (Input signal to the drive IC should be a 13.56MHZ PWM signal).

Please be kind enough to help me to design the above control signal.

Thank you.

0 Kudos
Message 3 of 3
(2,018 Views)