Dear NI,
Am facing a problem while writing data into the DMA in the Host environment,
Steps i did:
1. Invoked the FIFO in the Host environment.
2.Connected it to the VI reference.
3.Configured the DMA Depth.
4.Started the FIFO.
5.An Array is initialised and adata is fed into Array using the File operations.
6.and the DMA is read in the Target VI.,
In the Above process, i attached a indicator to the DMA while reading in the Target environment,
but i could not observe any activity,
if some one tried please let me know the procedure to do the same,
am attaching the Host VI for reference