Digital I/O

cancel
Showing results for 
Search instead for 
Did you mean: 

9469 Setup - cannot discover connections

Solved!
Go to solution

Hi,

 

I have 3 CompactRIO chassis 9057's each with a 9469 card in slot 2.

I have tried to configure the cards within MAX but i am unable to discover any signals connected to any of my chassis.

I currently have the cards setup in a daisychain configuration

 

Thanks Cat Very Happy

0 Kudos
Message 1 of 5
(308 Views)

Hi!

 

Try going through this article as initial troubleshooting steps. I think it'll be a strong starting point.

 

Regards,
Geo

0 Kudos
Message 2 of 5
(273 Views)

Hi Again,

 

Still stuck in the same position, i have tried all the steps in that atricle and still i do not see the connections on NI Max

0 Kudos
Message 3 of 5
(248 Views)

Did you install all the necessary drivers such as CompactRIO June 2018 or above and DAQmx 18.1 or above? Did you make sure to include Real-Time option when installing DAQmx?

0 Kudos
Message 4 of 5
(198 Views)
Highlighted
Solution
Accepted by topic author plastic-bag

All necessary drivers were installed correctly, in the end it turned out I could not configure any of the connections via MAX. Instead I had to use the labview project view and manually configure each connection in the properties tabs. It seems the MAX 'configurator' does not work and is not required anyway as it did not affect the function of the 9469'sModule configuration.JPG

0 Kudos
Message 5 of 5
(77 Views)