Denver - ALARM

cancel
Showing results for 
Search instead for 
Did you mean: 

Problem with the simulation time

I have my block diagram with transfer function, PID and two saturation. When I simulate the program, it work very good. The problem occur when I put some noise to the system and that noise is a second order transfer function with an input of random numbers, I simulate the systems and the simulation time goes crazy. In the beginning starts well but then stop, begin again, goes slower and 45 seconds later the simulation goes very very very slow. I don't know why is the reason.

0 Kudos
Message 1 of 3
(3,831 Views)

You now posted this same question in five different random fringe groups.

 

(I would suggest that you post in the LabVIEW forum. You can ask the moderator to delete all these duplicate posts)

0 Kudos
Message 2 of 3
(3,813 Views)

Unfortunately, it does not appear there is a way to delete the post so I am simply blocking replies.  Please post in the LabVIEW discussion forums.  Thanks.

0 Kudos
Message 3 of 3
(3,783 Views)