Data Acquisition Idea Exchange

Showing results for 
Search instead for 
Did you mean: 

call PFI DAQ terminals something else or add a delimiter before the number

Status: New

When configuring DAQ such as the M-series etc. as I configure the PFI connections I always read the "I" as a "1" e.g. PFI4 as connection 14.

Please change it from "PFI4" to "PFI 4" or "PFI_4" or anything better!

I know this is really a DAQ problem but LabVIEW could present the terminals better in the purple DAQ box



1 Comment
NI Employee (retired)

I am going to move this idea to the DAQ Idea Exchange so DAQ R&D can view it.