DQMH Consortium Toolkits Discussions

cancel
Showing results for 
Search instead for 
Did you mean: 

Having trouble running my Build.

Solved!
Go to solution

Hi all, 

I am making a DQMH application with 5 modules and a Launcher. My application works perfectly in the LabVIEW environment. But after I have created an exe out of it. It won't even launch. I had to enable debugging and this is the error it shows up for the Start Module through the launcher. I am attaching the Start Module and the Launcher for reference. 

 

 

 

 

Error_Build.PNG

Download All
0 Kudos
Message 1 of 4
(257 Views)

This is a well know issue. If you receive this error message when you try to launch the DQMH module, you have to check all the Controls and Indicators of your main.vi.

=> All typedef controls files must be public!

If you have nested modules, then you have to check them as well!

 

See also my checklist for DQMH/PPL

https://forums.ni.com/t5/DQMH-Consortium-Toolkits/my-DQMH-PPL-and-VILIB-PPL-best-practices/td-p/4155...

 

best

Claude

CLA / CTD
Message 2 of 4
(231 Views)
Solution
Accepted by topic author VBajaj

I'd also check any Conditional Disable Structures in your code to see if any of them contain broken code in the RUN_TIME_ENGINE==True frame (or the Default frame if the enabled frame in the IDE is RUN_TIME_ENGINE==False). 

Message 3 of 4
(185 Views)

Thanks a lot Darren. It was code written by someone else that was causing the issue and yes it was in a DDS with RUN-TIME set true with a broken wire. 

0 Kudos
Message 4 of 4
(158 Views)