DIAdem

cancel
Showing results for 
Search instead for 
Did you mean: 

Display timestamp with measurements

Solved!
Go to solution

Hi,

After switch to 'Channel Table' and switch to 'after 2D Axis system' now I can see the Time and the data. But something is wrong in comparison with the speed curve alone. With the timestamp the curve is not linear (curve 5)

Download All
0 Kudos
Message 11 of 14
(405 Views)

And the curve without the time. You can see it's linear but what is mean exactly : X Y dX and 1/dX ? I just need to find the frequency.     

0 Kudos
Message 12 of 14
(393 Views)
Solution
Accepted by GSXR100038

If you show only the Y channel, then DIAdem plots this channel against the index.

To analyze the signal characteristic, you can also use this function in ANALYSIS:

 

Walter_Rick_0-1634630811107.png

 

Walter_Rick_1-1634630831446.png

 

Message 13 of 14
(389 Views)

Hi,

Thank you for your helps, this is outside the scope of the topic I may be opening another topic to analyze signals. Thank you for your help.  

0 Kudos
Message 14 of 14
(385 Views)