07-13-2022 07:05 AM - edited 07-13-2022 07:14 AM
@Gregory wrote:
Sorry to add to the pedantry, but tst said "vertically centered". It takes some creativity to get a numeric indicator vertically centered on a much taller background. It could be done with the transparent indicator on top of a decoration.
Non-appoligetically adding to the pedantary
Easier to just show a rectangular LED indicator or, colorbox and justify the Caption vertically and horizontally centered. Still, that is some work. And a bit of creativity. So, likely something else was used. (Although, I have used it!)
07-13-2022 07:58 AM
OK.. not friday yet, but holidays are near...
Just another way to have -vertical- alignment... technically...
07-16-2022 12:07 PM - edited 07-16-2022 12:09 PM
From some random Facebook video about wind-tunnel testing:
I am always surprised when professional (?) production software still shows the icon and toolbar. 😄
07-16-2022 12:26 PM
@altenbach wrote:
From some random Facebook video about wind-tunnel testing:
I am always surprised when professional (?) production software still shows the icon and toolbar. 😄
That even has an Abort Button!
Worse, I think I see that the run arrow looks funky and the Run Continuous glyph looks bold
07-26-2022 11:09 AM
The CATRA Automatic Edge Tester uses a LabVIEW application to control the motors and drives as well as do the data acquisition and processing to evaluate the sharpness and durability of knife edges:
https://www.youtube.com/watch?v=FOIGaETxEh8
I ran across this because I worked for several years on a fully automated robotic knife sharpening system, which uses a LabVIEW front-end (but it's very tastefully done, you can't tell at a glance it's built in LabVIEW) and multiple cRIOs to accomplish real-time control over the robots to enable them to do force-feedback guided grinding and sharpening of the knives.
https://www.youtube.com/watch?v=Bk2yP5cgcws
07-28-2022 02:48 AM
Stunning UI design.. just a pity that they didn't do the icon...
08-01-2022 11:33 PM - edited 08-01-2022 11:35 PM
Here another appearance. Seifert DP602 fully automated x-ray testing machine in action starting from 3:08 (LabVIEW starring at 3:55):
It is LabVIEW 7.1 + VDM. Something from 2005.
And sorry, I didn't change standard default icon. 😉
08-01-2022 11:57 PM
And one more here:
You can easily recognize the "standard" LabVIEW indicators at 1:25:
It is LabVIEW 2010 (I guess). And yes, the standard LabVIEW icon was changed this time 😉
08-02-2022 08:46 AM
@Andrey_Dmitriev wrote:
And one more here:
You can easily recognize the "standard" LabVIEW indicators at 1:25:
It is LabVIEW 2010 (I guess). And yes, the standard LabVIEW icon was changed this time 😉
@Andrey_Dmitriev wrote:
And one more here:
You can easily recognize the "standard" LabVIEW indicators at 1:25:
It is LabVIEW 2010 (I guess). And yes, the standard LabVIEW icon was changed this time 😉
I am not surprised at all! There is a LabVIEW Champion writing code for Phoenix.
08-22-2022 03:38 PM