From Friday, April 19th (11:00 PM CDT) through Saturday, April 20th (2:00 PM CDT), 2024, ni.com will undergo system upgrades that may result in temporary service interruption.

We appreciate your patience as we improve our online experience.

Home Community Discussion Forums Additional NI Product Boards Automotive and Embedded Networks Topic

Automotive and Embedded Networks

cancel
Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for 
Search instead for 
Did you mean: 

To perform a loopback operation on data using USB-CAN interface board (USB-8502)

To perform a loopback operation on data using USB-CAN interface board (USB-8502)

‎10-18-2021 07:40 AM

Hello all,

 

I have a USB-8502 CAN interface device. Now, I want to develop an application to loopback the data sent from test device using USB port to USB-8502 device.

 

To be more precise, CANFD port-1 of USB-8502 device is connected to CANFD port-2 to have a loop connection for the data flow and see the acknowledgement back in test device over USB.

 

The test device is a WINDOWS-10 PC with LabVIEW software installed.

 

Are there any sample codes available to serve this purpose? or Can you please provide me any similar codes to serve this purpose.

 

 

Thanks in advance.

0 Kudos
Message 1 of 2
(1,300 Views)
Reply

Re: To perform a loopback operation on data using USB-CAN interface board (USB-8502)

‎10-18-2021 08:01 AM

in LabVIEW: Help -> Find Examples

  Hardware Input and Output -> CAN -> NI-XNET -> Loopback Test

 

0 Kudos
Message 2 of 2
(1,288 Views)
Reply