I had my program working with a PCMCIA-CAN/DS Series 2, 2 Port, Dual-Speed CAN PCMCIA-Interface. Everything seemed fine for past few days. This morning I came in to work and was getting this error. I tried resetting the card (Shift + CTRL and right-clicking on the card) and also tried re-installing NI-CAN 2.7.4. The card passes the self test.
Also, I am using an expresscard adapter with my laptop running Windows 7. I doubt this is the issue if I am passing the self test.
Any ideas? Is the CAN card broke?
I attached the full nicanErr.txt file but here is the first few lines:
[OSINFO_SECTION]
OS=Workstation
Service_Pack= (Build 7600)
[DRIVER_VERSION_SECTION]
NICAN.DLL_VERSION=12.6.2f3
NICANFRM.DLL_VERSION=12.6.2f3
DRIVERS\NICANPK.DLL_VERSION=12.6.2f3
NICANPU.DLL_VERSION=12.6.2f3
NICANTSK.DLL_VERSION=12.6.2f3
NICANCFQ.DLL_VERSION=2.6.0f0
NCVI.DLL_VERSION=2.7.3.8192
NICAN_S1.NFW_VERSION=2050300
NICAN_S2.NFW_VERSION=2050300
[CURRENT_SECTION]
Section_Index=3
[INDEX_0]
Local_Time= 05/21/2013 09:46:02.223
Err_Status= Status:0xb20d0002-Location:0x30000000-Internal:0x020d0000
Function= ncCloseObject
[INDEX_1]
Local_Time= 05/23/2013 07:50:43.660
Err_Status= Status:0xa0fff002-Location:0x20000000-Internal:0x00fff000
Function= ncReadMult-CAN1
[INDEX_2]
Local_Time= 05/23/2013 07:50:44.101
Err_Status= Status:0xa0fff002-Location:0x20000000-Internal:0x00fff000
Function= ncAction-CAN1
[INDEX_3]
Local_Time= 05/23/2013 07:50:50.351
Err_Status= Status:0xa0fff002-Location:0x20000000-Internal:0x00fff000
Function= ncCloseObject