Additional NI Software Idea Exchange

Community Browser
Top Authors
cancel
Showing results for 
Search instead for 
Did you mean: 
Post an idea

The current Device Driver Installer dialog is not obvious to use. First of all you have to figure out which drivers that you need for your products and then you would probably prefer to remove other unnecessary drivers. However, this is a tedious process with a lot of dependencies. 

I have seen many people just installing everything (with its drawbacks) to be safe, eventhough they only needed the NI RIO driver.

Picture2.png

I'd like to see a more user friendly dialog where drivers are automatically selected.


My suggestion is that the user instead filters out the drivers on a product level like this:

Picture1.png

Let say you choose Modular Instruments. Then next page could let you filter on what type of instrument you have; Scopes, FlexRIO, DMMs, RF, Switching etc...

 

One of the buttons in the bottom would be something like "Add more products?" so you could iterate this process and finally all needed drivers would be filtered out.

 

What do you think?

/Pelle - NI Sweden

The Update Service supposedly already checked in the background and found I needed updates.  

Yet when I say “view updates” it makes me wait on a progress bar while it checks for updates.  

And then when I click “Upgrades and Service Packs” it has to check AGAIN with another, extra-slow progress bar.

 

It should just do all the checking in the background, retrieve the full list of updates, and stop interrupting our work to wait on progress bars.

Hello,

 

Mapping in VeriStand 2011 consists of only text, but user could grasp the whole mapping if the number of connections is increasing. So, visualized mapping tool like dSPACE ConfigurationDesk as below image must be good user interface for users.ConfigurationDesk.png

Regards,

 

Saku

 

Hello,

 

It would be nice to add a tool like RAD (NI Replication And Deployement utility) directly into MAX.

But a RAD compatible with all Targets LabVIEW Runtimes.

 

... a kind ok target cloner, saver , restorer ... Smiley Happy

 

Rad.png 

 

Manu.

I/O Trace is extremely useful when debugging system-level text-based applications. Error handling for systems involving multiple drivers + software packages (RF toolkits, for example) is very difficult. After recognizing there was an error, we still have to determine which device threw the error and then query the appropriate driver/toolkit with the correct handle to determine what the error was. NI I/O Trace is a great way to quickly determine which device threw an error and at which function call. Unfortunately, the error reporting returned by I/OTrace is pretty limited. For example, consider the I/O Trace shown below of an application synchronizing two waveform generators. A property is not configured correctly for one of the generators. I/O Trace clearly indicates there is an error, however the exact cause of the error is difficult to discern from the message: 

 

Capture.PNG

 

The actual error message is: “The Sample Rate property can not be configured if OSP Enabled is VI_TRUE. “. It would be great if I/O trace could provide the entire error description. Compare this to the LabVIEW error handler:

Capture.PNG

Benefit: Simplify the process and reduce errors when using FPGA personalities

 

Idea: Querry the user-generated FPGA diagram and automatically create the XML file.  Additionally, have some kind of editor/viewer for the XML file that would present the information similar to how it is presented in the System Explorer but allow the user to edit certain values (or just make it editable in the system explorer).  Some items would be read-only (items specific to the bitfile communication) and others would be editable (heirarchy, scaling, etc). 

 

Ultimately, the process for using FPGA Personalities would be:

 - create FPGA VI using NIVS interface/template

 - select interface in "utility/view" or System Explorer (XML file automatically generated)

 - edit default settings if desired

 

In LabVIEW, we have a lot of options for saving our projects as seen below:

 

LabVIEW.jpg

 

 

In VeriStand, currently, you only have the option for a normal save (as shown below). I think it would be nice to have a "Save As" for saving a copy of the project and, if possible, a "Save for Previous Version".

 

 

VeriStand.jpg

 

This is a bit of a feature request for the service request manager and/or as a stand-alone (my NI web) tool!  

 

It is needed because the NI webpage makes it terribly hard to search for CAR#'s and a CAR# is only listed when solved, and only listed for the one version where it was resolved, making it nigh-on impossible to check lists of (new) CAR#s and get notified when they are resolved.

For example, I know this CAR exists, but I'm not sure if it has been resolved and the NI search just didn't find it, or if does not exist (user input error for example) or anything..

no car in search.png

 

  1. The tool should reside on "my NI" but it should be possible to export/share the list of monitored CAR's (so colleageus/companies can maintain one master list of company relevant CAR's).
  2. The tool should connect/check against NI (ideally directly to a back-end database) and return any "public" information related to a CAR, such as "in progress", "known work-around", "details" etc. along with driver/software version where it was resolved (if any).
  3. The tool should present a clear list (ideally with green checkmarks / red cross icons) showing the status of each CAR and maybe a synopsis/one-liner from the description to indicate what problem the number is for.
  4. wish-list added feature:  allow (on a per user basis) the user to add personal notes to a CAR (e.g. this affects projects x, y and z, once resolved, refactor those projects to remove performance intensive work-arounds!) or similar.
  5. e-mail notification (optional/configurable) when the status changes on any of the tracked CAR's.

 

 

As far as how it relates to the service request manager, I would prefer a separate tool but that it also can link to the service request manager as outlined below:

 

A small but significant number of tickets either relate to, or create one or more CAR#'s (or at least mine seem to create a large amount of CAR's).

When a support tech adds / associates a ticket# with a CAR#, ideally this CAR# would be automatically added to the user's CAR Tracking list..

 

In addition it would be great if the back-end database tracked CAR#'s and offered up a list of these numbers in the webpage overview, for example next to the "status" column. Taking it a step further, it would be very nice if NI could make it simpler to check if a CAR has been resolved and if so, what version of LabVIEW it was resolved in/with. This information could be displayed in the same web page table, or a new page to itself. The "Status" column could then also be expanded with a green check-mark if (all) associated CAR#'s have been resolved..

 

Tracking CAR's and manually trying to search and check them off lists locally is labor intensive, especially since the web-page "search" does not do even a passable job when you enter CAR numbers.

For security reasons, many customers using Volume License Manager to administer licenses to client machines do not authorize users to download and install anything from the web. Therefore, if a critical patch is released, the client machines are unable to download this unless it is distributed by the administrator. It would be useful for the VLM administrator to be able to configure the Update Service such that all Users can run the Update Service but the service has been configured to point to an internal network share rather than an internet location outside the firewall. This way, the administrator could make critical updates and patches available for the client machines and the clients can be notified and install them.

If you want to exchange a model you have to reconfigure many things. You could use Aliases to reduce the effort for the Workspace and Workspace Tools.

But in the System Explorer you can only use Aliases for Calculated Channels.

Please make it possible to use Aliases also for Mappings, Alarms and Procedures.

 

Thank you,

 

Frank

Editing the NI VeriStand Workspace is a very time-consuming job. Especially after arranging a huge number of controls and indicators it is a pain to drag and drop each object in order to move the whole arrangement to another place.

 

Improvement:  If the user could mark multiple objects at one time he could move them all together. The selection could be done by holding the Shift or Ctrl key or just by framing them with a selection box.

Make the Measurement & Automation Explorer ( MAX ) Import Assistant Window resizable, because now not all informations are visible to the user:

 

MAX_resizable

The only way to edit the order of VeriStand workspace screen pages once they're created is to edit the cryptic XML file where screen pages are referred to by numbers. I'd like to be able to reorder the screen pages from within the workspace. Thank you.

Hello! 

 

It would be extremely usefull and would save lots of frustration if the Veristand Sequence Editor (and all of verstiand for that matter) had undo and redo functions. It is surprizing that software of this caliber does not have such a basic function. I posted this in the main veristand forum and wanted to also make sure it made it into the Idea Exchange.

 

Thanks!

To be specific, I am talking about the link below from the 3.x NI License Manager (this is on a VM I use for LV 8.5 development)

Web Activation.png

 

It had the nice feature of filling in your computer's information and all the products you are activating as part of the link.  Unfortunately, NI's website no longer supports this pre-filling - using this link in 3.x now just redirects you to the normal result of typing in ni.com/activate into your browser.

 

My typical workflow with this screen would be to enter my real serial number into the preceding dialog, use this dialog to get the activation link, go back to the preceding dialog and enter in a fake serial number, press next twice to get the activation codes entry dialog, and copy the activation codes into the dialog.

In NI License Manager 4.x, you either need to use web activation (which saves your serial number everywhere) or enter codes manually, requiring a trip to http://ni.com/activate for every product that needs activation (and trying to figure out how the name of an application in License Manager - say "Vision Development Module Runtime" - matches against the website's entries - say "Vision Development Module", "Vision Development Module (FRC)", "Vision Development Module Runtime (FRC)", and "Vision Runtime") and a bunch of e-mail spam if you choose to get a copy of the activation e-mailed to you.  Note that activating LabVIEW alone requires two of these trips (or at least used to), as the Professional Development system and the Application Builder activate separately.

 

As far as why I often don't want to use the built-in Web Activation, it stores your serial number on the computer.  This leads most (I think LabVIEW 2017 is an exception) versions of LabVIEW to display your serial number in their splash screens and about boxes - this could be visible in a public setting or at a customer site.  It also stores the serial number even after you deactivate it, so if you temporarily activate a tester while you are doing its initial debug, your serial number will be stored for your customer to reactivate (and possibly distribute).

 

I labelled this as MAX, as there is no License Manager Idea Exchange - in a way this applies to all NI products.

[Edited on 8/28/2014 by moderator Diego Carvajal (dcarvaja)] [Image included in original post as requested] To help debug medium and large real-time test sequences, it would be very useful if there was a sequence step that allowed the user to specify a console message.

 

Much like the Print Debug String VI helps debug issues when building custom devices, this step would allow the developer to insert specific console flags and see what part of his/her real-time sequence is executing.

 

Stimulus profile debug mockup.png

The custom Device allows to include in the name of generated files a timestamp, with this format: %<%I_%M_%S_%p_%d_%m_%y>T

 

Today, my customer prefer something like %<Y%m%d_%H%M%S>
Tomorrow? I don't know.

 

Having a format string configurable from System Exlorer would be really convenient.

Like how user channels can be grouped into folders, I'd like to be able to group Calculated Channels into folders. Thank you.

I have many procedures that check for certain conditions before completing its intended function. If a precondition is not met, the procedure exits. It'd be nice to be able to pop up dialogs as necessary. Right now, in order to do so, I have to have the procedure call other alarms if I want any sort of feedback/popup which gets convoluted pretty quickly. Thanks.

The Project Explorer is inoperable when the System Definition File is open.

I frequently want to open the Workspace or Stimulus Profile Editor while working on the System Definition File.

This should be possible because it is already possible to let the Workspace open before you start the System Definition File.

 

Frank