From Friday, April 19th (11:00 PM CDT) through Saturday, April 20th (2:00 PM CDT), 2024, ni.com will undergo system upgrades that may result in temporary service interruption.
We appreciate your patience as we improve our online experience.
From Friday, April 19th (11:00 PM CDT) through Saturday, April 20th (2:00 PM CDT), 2024, ni.com will undergo system upgrades that may result in temporary service interruption.
We appreciate your patience as we improve our online experience.
11-07-2017 10:57 AM
I wanted to change the Dani robot sbrio to MyRio. When I tried to connect it, it dose not seem to work, I checked the pins and connected it with the data sheet still there is no response . how should it be connected.
11-13-2017 11:30 AM
Hi elak7,
Do you still need help with this?
There is some information missing:
Kind regards
11-15-2017 10:33 AM
Yes, i am trying to replace sbrio in dani with myRIO
11-21-2017 04:09 AM
Hi Elak,
So when you say the connection does not seem to work, what are you connecting to, and how are you connecting?
Are you able to detect anything on a host computer?
11-22-2017 10:12 AM
I am not getting any response from the host computer.
Dani pin - myRIO pin
3 - 11
4 - 29
5 - 13
6 - 5V pin
7 - 15
8 - 12
9 - 17
10 - 3.3V Pin
11 - 19
12 - 16
13 - 21
14 - 20
15 - 23
16 - 24
17 - 25
18 - 8
11-24-2017 04:05 AM
Hi elak,
First we should make sure that you are connecting to the MyRIO correctly.
Please make sure that you have followed the steps here:
Creating Wireless Networks Using NI myRIO (myRIO Toolkit)
Let me know how that goes.