topic Re: 3D graph - Standard deviation in DIAdem
https://forums.ni.com/t5/DIAdem/3D-graph-Standard-deviation/m-p/2840948#M18696
<P><BR />Dear Brat,</P>
<P> </P>
<P>Thanks for your reply.</P>
<P> </P>
<P>Yes I know that for 3D graph , I have to issue X channel and Y channel.</P>
<P><BR />The file I have sent to you with 453 index each index contain 12 signal i want to show on 3D graph.</P>
<P> </P>
<P>I want to issue 453 Channel for X-axis named as follow : H(1) till H(453) , each of length 2000</P>
<P><BR />The channel for the Y-axis will be Time and it will be only one with length 2000 and waveform x-step 5E-05 (total time = 0.1)</P>
<P><BR />These graphs have that have to be issued on 3D graph as follow :</P>
<P>Mean F (Separte 3D graph)</P>
<P><BR />Standard Dev F (Separte 3D graph)</P>
<P>Mean T (Separte 3D graph)</P>
<P><BR />Standard Dev F (Separte 3D graph)</P>
<P>Mean P (Separte 3D graph)</P>
<P><BR />Standard Dev P (Separte 3D graph)</P>
<P>Mean RMS (Separte 3D graph)</P>
<P><BR />Standard Dev RMS (Separte 3D graph)</P>
<P> <BR />So, Eight 3D graphs have to bs issused.</P>
<P> </P>
<P>Then,<BR />I want to issue 453 Channel for X-axis as follow : H(1) till H(453) , each of length 4750</P>
<P>I want to make one 3D graph in which : X-axis named from H(1) till H(453) and Y-axis will be Mean AmplitudePeak and Z-axis will be Mean Frequency (Separte 3D graph).</P>
<P> </P>
<P>I will not need the : Standard Dev Peak & Standard Dev Frequency<BR />I want to show all the 3D graph to be showed on increasing values</P>
<P> </P>
<P>The File that I have sent to you is in correct sequence, so index (1) is for H(1) and index (453) is for H(453)</P>
<P> </P>
<P>You will find the file on <A href="ftp://ftp.ni.com/incoming/Total.rar" target="_blank">ftp://ftp.ni.com/incoming/Total.rar</A></P>
<P> </P>
<P>Kind regards,<BR />Mohamed Farouk</P>Thu, 08 May 2014 09:35:03 GMTmfarouk2014-05-08T09:35:03Z3D graph - Standard deviation
https://forums.ni.com/t5/DIAdem/3D-graph-Standard-deviation/m-p/2837272#M18674
<P> </P>
<P>Dear sirs,</P>
<P> </P>
<P>First of all I am new diadem program.</P>
<P> </P>
<P>I need to know how Is there is any script to issue a 3D graph? I want to make many 3D graph and each one contain of about 500 siganls inside</P>
<P> </P>
<P>Please advice in details and let me know if you need any other inforamtion.</P>
<P> </P>
<P>Kind regards,</P>
<P>Mohamed Farouk</P>Mon, 05 May 2014 19:28:08 GMThttps://forums.ni.com/t5/DIAdem/3D-graph-Standard-deviation/m-p/2837272#M18674mfarouk2014-05-05T19:28:08ZRe: 3D graph - Standard deviation
https://forums.ni.com/t5/DIAdem/3D-graph-Standard-deviation/m-p/2838328#M18685
<P>Hi Mohamed,</P>
<P> </P>
<P>Graphs in DIAdem are usually defined interactively, saved to a *.TDR layout file, then loaded programmatically to make your report each time. Let's start with the type of 3D graph you're interested in. You say you have 500 signals-- do you want to plot those on a waterfall graph, or as a mesh surface, or as a top-down intensity plot, or what?</P>
<P> </P>
<P>Can you post a sample data set?</P>
<P>Brad Turpin</P>
<P>DIAdem Product Support Engineer</P>
<P>National Instruments</P>Tue, 06 May 2014 15:10:55 GMThttps://forums.ni.com/t5/DIAdem/3D-graph-Standard-deviation/m-p/2838328#M18685Brad_Turpin2014-05-06T15:10:55ZRe: 3D graph - Standard deviation
https://forums.ni.com/t5/DIAdem/3D-graph-Standard-deviation/m-p/2839102#M18689
<P> </P>
<P>Dear Brad,</P>
<P> </P>
<P>Enclosed you will find a word file named (example). I want to show some 3D graphs like these ones showed in this word file. What is appear in this graph hundreds of signals in one 3D graph.</P>
<P>The way i want to show my 3D graph is (spikes) but I am quite sure that there is a way to insert 3D axis definition by script not manually each time.</P>
<P>I want to make about 20 to 25 of this 3D graph !</P>
<P>Diadem file is so big to attach it.</P>
<P> </P>
<P>If you need any other information , please let me know.</P>
<P> </P>
<P>Kind regards,</P>
<P>Mohamed Farouk</P>Wed, 07 May 2014 05:35:41 GMThttps://forums.ni.com/t5/DIAdem/3D-graph-Standard-deviation/m-p/2839102#M18689mfarouk2014-05-07T05:35:41ZRe: 3D graph - Standard deviation
https://forums.ni.com/t5/DIAdem/3D-graph-Standard-deviation/m-p/2840048#M18691
<P>Hi Mohamed,</P>
<P> </P>
<P>Thanks for the picture, it's now clear what you want to achieve, and DIAdem should be able to make that type of 3D graph for you. DIAdem does require an X channel and a Y channel in addition to your 500 Z channels in order to make a 3D graph, so you will need to create those each time. They can be created automatically, either in the importing routine or after the data is loaded into DIAdem.</P>
<P> </P>
<P>What file format are you loading into DIAdem? You can post an example file to ftp.ni.com/incoming even if it's huge, and then I could help you automatically create those 3D graphs.</P>
<P> </P>
<P>Brad Turpin</P>
<P>DIAdem Product Support Engineer</P>
<P>National Instruments</P>Wed, 07 May 2014 16:39:14 GMThttps://forums.ni.com/t5/DIAdem/3D-graph-Standard-deviation/m-p/2840048#M18691Brad_Turpin2014-05-07T16:39:14ZRe: 3D graph - Standard deviation
https://forums.ni.com/t5/DIAdem/3D-graph-Standard-deviation/m-p/2840948#M18696
<P><BR />Dear Brat,</P>
<P> </P>
<P>Thanks for your reply.</P>
<P> </P>
<P>Yes I know that for 3D graph , I have to issue X channel and Y channel.</P>
<P><BR />The file I have sent to you with 453 index each index contain 12 signal i want to show on 3D graph.</P>
<P> </P>
<P>I want to issue 453 Channel for X-axis named as follow : H(1) till H(453) , each of length 2000</P>
<P><BR />The channel for the Y-axis will be Time and it will be only one with length 2000 and waveform x-step 5E-05 (total time = 0.1)</P>
<P><BR />These graphs have that have to be issued on 3D graph as follow :</P>
<P>Mean F (Separte 3D graph)</P>
<P><BR />Standard Dev F (Separte 3D graph)</P>
<P>Mean T (Separte 3D graph)</P>
<P><BR />Standard Dev F (Separte 3D graph)</P>
<P>Mean P (Separte 3D graph)</P>
<P><BR />Standard Dev P (Separte 3D graph)</P>
<P>Mean RMS (Separte 3D graph)</P>
<P><BR />Standard Dev RMS (Separte 3D graph)</P>
<P> <BR />So, Eight 3D graphs have to bs issused.</P>
<P> </P>
<P>Then,<BR />I want to issue 453 Channel for X-axis as follow : H(1) till H(453) , each of length 4750</P>
<P>I want to make one 3D graph in which : X-axis named from H(1) till H(453) and Y-axis will be Mean AmplitudePeak and Z-axis will be Mean Frequency (Separte 3D graph).</P>
<P> </P>
<P>I will not need the : Standard Dev Peak & Standard Dev Frequency<BR />I want to show all the 3D graph to be showed on increasing values</P>
<P> </P>
<P>The File that I have sent to you is in correct sequence, so index (1) is for H(1) and index (453) is for H(453)</P>
<P> </P>
<P>You will find the file on <A href="ftp://ftp.ni.com/incoming/Total.rar" target="_blank">ftp://ftp.ni.com/incoming/Total.rar</A></P>
<P> </P>
<P>Kind regards,<BR />Mohamed Farouk</P>Thu, 08 May 2014 09:35:03 GMThttps://forums.ni.com/t5/DIAdem/3D-graph-Standard-deviation/m-p/2840948#M18696mfarouk2014-05-08T09:35:03ZRe: 3D graph - Standard deviation
https://forums.ni.com/t5/DIAdem/3D-graph-Standard-deviation/m-p/2841766#M18699
<P>Hi Mohamed,</P>
<P> </P>
<P>I created a layout and a script that builds the eight 3D graphs you requested.</P>
<P> </P>
<P>Brad Turpin</P>
<P>DIAdem Product Support Engineer</P>
<P>National Instruments</P>Thu, 08 May 2014 18:47:49 GMThttps://forums.ni.com/t5/DIAdem/3D-graph-Standard-deviation/m-p/2841766#M18699Brad_Turpin2014-05-08T18:47:49ZRe: 3D graph - Standard deviation
https://forums.ni.com/t5/DIAdem/3D-graph-Standard-deviation/m-p/2842772#M18700
<P>Hi Brat,</P>
<P> </P>
<P>Thank you very much for your kind help which i really appreciate.</P>
<P> </P>
<P>Can you please let me know about this point of my previous message :</P>
<P><BR />"I want to issue 453 Channel for Y-axis as follow : Index(1) till Index(453) which is <U><STRONG>INDEX</STRONG></U> as you do it in the last 3D graphs you have sent to me, each of length 4750</P>
<P>I want to make one 3D graph in which :Y-axis named from Index(1) till Index(453) and Z-axis will be Mean AmplitudePeak and X-axis will be Mean Frequency (Separte 3D graph)</P>
<P> </P>
<P>Just a question , Is the script and the graph that you already sent to me will work with all the data I will have either the length of the channel is different ?</P>
<P> </P>
<P>Thanks in advance for your reply.</P>
<P> </P>
<P>Kind regards,</P>
<P>Mohamed Farouk</P>
<P> </P>Fri, 09 May 2014 12:40:07 GMThttps://forums.ni.com/t5/DIAdem/3D-graph-Standard-deviation/m-p/2842772#M18700mfarouk2014-05-09T12:40:07ZRe: 3D graph - Standard deviation
https://forums.ni.com/t5/DIAdem/3D-graph-Standard-deviation/m-p/2843294#M18702
<P>Hi Mohamed,</P>
<P> </P>
<P>The solution I sent you will not mind if the channel length changes on your measured values. Here's an updated version that will enable you to pick a different channel instead of the Time values in the waveform data.</P>
<P> </P>
<P>Brad Turpin</P>
<P>DIAdem Product Support Engineer</P>
<P>National Instruments</P>Fri, 09 May 2014 18:32:23 GMThttps://forums.ni.com/t5/DIAdem/3D-graph-Standard-deviation/m-p/2843294#M18702Brad_Turpin2014-05-09T18:32:23Z