LabVIEW Simulation model parameters

Fontanhell — Sun, 13 Nov 2016 16:55:12 GMT

I have built a LabVIEW model into a .dll to run it inside a Veristand project. I used the following set up for the connector pane:

- Model input signals: Required

- Model parameters: Recomended

- Model output signals: Recomended

If i load the model into Veristand i can see correctly the Inports, Outports and Parameters.

Now i want to initialize the model parameters from a .txt file. I have flagged the option in the "Simulation Models" window and i have pointed a .txt file. In the .txt. file i have used the same syntax i use for Simulink models imported in LabVIEW. However, I'm not able to run my project.

How do I need to format my parameters.txt file?

Thanks in advance

Rif.: LabVIEW Simulation model parameters

LiciaP — Mon, 14 Nov 2016 11:18:39 GMT

Hi,

you can refer to this VeriStand help topic.

I hope this helps!

Bye

Licia

Rif.: LabVIEW Simulation model parameters

Fontanhell — Tue, 15 Nov 2016 07:43:41 GMT

My bad...I forget to add the parameters to the list to be imported from an external file.

Anyway, thanks for the attention

topic Rif.: LabVIEW Simulation model parameters in VeriStand

LabVIEW Simulation model parameters

Rif.: LabVIEW Simulation model parameters

Rif.: LabVIEW Simulation model parameters