topic Re: Error 1003 occurred at Invoke Node in LabVIEW

Error 1003 occurred at Invoke Node

kayfolom — Thu, 27 Oct 2011 06:43:29 GMT

Good morning.
I work with LW8.5 and created with the following architecture:
There is main.vi on the links at the user's calls and runs the other VI.
That is, not directly, these are not included in the VI block diagram main.vi.
In the development of a happening in normal mode, all dynamically called VI,
But once I make EXE, when you try to call the dynamic VI error 1003.
Error 1003 occurred at Invoke Node in Main.vi

Possible reason (s):

LabVIEW: The VI is not executable. Most likely the VI is broken or one of its subVIs cannot be located. Open the VI in LabVIEW using File>> Open and verify that it is runnable.

VI Path: C: \ Shaikov \ Labwiev \ builds \ NSIAES \ Initialsettings \ Initialsettings.vi

Show you how to act?
Thank you.

Re: Error 1003 occurred at Invoke Node

margasan — Thu, 27 Oct 2011 21:18:59 GMT

Hello Kayfolom,

In the link below you will find an explanation of the error and how to fix it:

Error 1003 When Using VI Server in a LabVIEW Application

you may wanto to check this link too..

How Can I Call a VI Dynamically from an Executable Without Including Those VIs in the Build?

And you may want to take a look to the related links at the end of this documents

Regards,

Martin Garcia

Applications Engineer

National Instruments Corp.

Re: Error 1003 occurred at Invoke Node

kayfolom — Fri, 28 Oct 2011 06:25:46 GMT

Thanks for the answer

I read this http://digital.ni.com/public.nsf/allkb/410F2EC66F60F9B0862569EE006F4FA0?OpenDocument,

but do not want to include a dynamic VI in in the Build, because in the future I want to change the dynamic VI, not collecting new EXE.

http://digital.ni.com/public.nsf/allkb/644C66077212FC218625760F004C6733?OpenDocument this is realy good,

but creating the. llb file for large-scale VI, the size of the file reaches 70 mb.
If I am to each of its dynamic VI will create such a file, this is how much space you need me?
Is there another solution? Can I somehow on another call Dynamic VI from the main Main.vi?

Re: Error 1003 occurred at Invoke Node

margasan — Fri, 28 Oct 2011 13:29:31 GMT

Hello Kayfolom,

As far as I know there is no other way to do that.

Regards,

Martin Garcia

Applications Engineer

National Instruments Corp.

Re: Error 1003 occurred at Invoke Node

kayfolom — Mon, 31 Oct 2011 14:18:15 GMT

Hello margasan.

In my Projects I use to pass more dynamic and VI classes.
In the attached file - an example of my project:
In the main folder is a folder UpperClass, it is the parent class and child classes and HeirClass.lvclass Heir2Class.lvclass are organized into folders respectively Plugin1 and Plugin2, and these Classes inherit from the parent one and the same WI - UpperClassTest.vi. Plus, this Plugin1 has two, independent from the others, but related classes. A block diagram for an object placed Core.vi UpperClass.
So, here, if you take EXE, making llb files and run them from start VI for each of the Plugin, then everything works OK.
But as soon as I on the block diagram of a Plugin will put any object UpperClass, or one of its nasalednikov, there arises a familiar ERROR 1003. Prompt, plc, margasan I get rid of it in this case?

Re: Error 1003 occurred at Invoke Node

margasan — Mon, 31 Oct 2011 20:57:25 GMT

Hello Kayfolom,

Is the error ocurring in the develpment enviroment of labview or when trying to create or runing the EXE file?

Regards

Martin

Re: Error 1003 occurred at Invoke Node

kayfolom — Tue, 01 Nov 2011 05:31:31 GMT

runing the EXE file

Re: Error 1003 occurred at Invoke Node

margasan — Tue, 01 Nov 2011 13:50:54 GMT

Hello Kayfolom

Please check this link and give it a try to the steps listed there:

http://digital.ni.com/public.nsf/websearch/705C2ECA081F3C7986256C0F00559B02?OpenDocument

This may help you to identified the part of your code that is causing the error

Regards,

Martin

Re: Error 1003 occurred at Invoke Node

Amadeo — Wed, 27 Sep 2017 01:13:58 GMT

My main.vi calls with text buttons to three different subvi's when i run in labview environment ir runs perfectly, i need to make an exe to run them w/o labview in the customer pc, so when i place those vis in the project and i build the .exe it shows the terrible box message with the error 1003... the subvis open with a broken arrow and saying than there are missing subvi's...

Re: Error 1003 occurred at Invoke Node

NickelsAndDimes — Wed, 27 Sep 2017 15:48:50 GMT

Hey Amadeo,

This thread has been dead for 6 years. You're more likely to get a response if you make a new post instead of bumping an old post.

Re: Error 1003 occurred at Invoke Node

Amadeo — Wed, 27 Sep 2017 20:26:44 GMT

Ok Nickels&dimes i got it, only for future readers i solved this case making all this VIs included onto .exe files and they are called by the system exec and each call from a first Vi with a root of case structures called by own booleans... excuse for posting 6 years later!

Re: Error 1003 occurred at Invoke Node

parthabe — Thu, 29 Mar 2018 19:57:14 GMT

@margasan wrote:

you may wanto to check this link too..

How Can I Call a VI Dynamically from an Executable Without Including Those VIs in the Build?

I know this thread is old, but when I tried to open the KB article, it says...

Error

You are not authorized to view this document

Could someone post the working link here?!

Re: Error 1003 occurred at Invoke Node

BdogTheWatchdog — Fri, 30 Mar 2018 19:11:14 GMT

Hey Pathabe,

We took that link offline because we recommend including the VIs in the build. This is because LabVIEW searches through your hard drive and aggregates all functions and subVIs to one location. With just the LabVIEW Run-Time Engine, you must have the same dependencies as the development machine.

If you must do so, you can try the following:

Control the dependency of the subVI by moving it to the desired folder, and then loading the VI into LabVIEW ('Select a VI...' on the functions palette)
Build a source distribution

I recommend making a new post if you have any issues with the above.

Bdog