simultaneous wireless and wired data acquisition using NI WSN-9792

[aj2011]

Good Afternoon,

I'm trying to develop an application where is supposed to acquire data from a wireless DAQ board and from an ethernet DAQ board.

I was checking on your website and i found NI WSN-9792 gateway. I was wondering if it is possible to make a simultaneous data acquisition from wifi and wired DAQ boards using that equipment.

Best Regards.

[Nicolas_NIF]

Good afternoon,

Is your wireless DAQ board is a WSN (like this : http://search.ni.com/nisearch/app/main/p/bot/no/ap/global/lang/en/pg/1/q/wsn/) or an WLS (like this : http://search.ni.com/nisearch/app/main/p/bot/no/ap/global/lang/en/pg/1/q/wls/scope/en%2Cfr/)?

If your wireless DAQ board is a WLS, you can connect it directly on your PC by wifi network.

Regards,

[aj2011]

Good Afternoon,

One of them is WLS and the other one is connected through ethernet. My doubt is if we can make a simultaneous acquisition, having the 2 DAQ boards (wifi and ethernet) synchronized without any kind of delay between them.

Best Regards.

[Nicolas_NIF]

Good afternoon,

It's possible to acquire the two datas and synchronize them with software.

Best regards.

[aj2011]

Good afternoon,

Could you tell me where to find any tutorial or other kind of documentation on this subject?

Best Regards.

[Nicolas_NIF]

You can find several examples of synchronisation with DAQ in LabVIEW. Open the NI Examle Finder navigate to the Hardware Input and Output >> DAQmx >> Synchronisation >> Multi device.

Regards,

[aj2011]

Thank you for all 🙂

Best Regards