Labview Phone that works on a LAN

by Member tomnz ‎06-18-2012 09:29 PM - edited ‎01-27-2017 04:03 AM


Communication via local lan through speech with a LabVIEW program.


You can communicate via your local lan via speech with this. Uses UDP protocol to communicate and send data to the receiver. You will either need the IP address of the receiving PC or go into Broadcast mode.

Steps to Execute

  1. Download the library
  2. Configure setup information
  3. Run the VI


LabVIEW 2011 or Newer

**This document has been updated to meet the current required format for the NI Code Exchange. For more details visit this discussion thread**