From Friday, April 19th (11:00 PM CDT) through Saturday, April 20th (2:00 PM CDT), 2024, ni.com will undergo system upgrades that may result in temporary service interruption.
We appreciate your patience as we improve our online experience.
From Friday, April 19th (11:00 PM CDT) through Saturday, April 20th (2:00 PM CDT), 2024, ni.com will undergo system upgrades that may result in temporary service interruption.
We appreciate your patience as we improve our online experience.
02-26-2013 05:36 PM
Wouter, do you know of anyone else that is using LabVIEW Embedded for ARM?
02-27-2013 01:44 AM
There are some people that want to use it. but I don't know them.
You can find the people here on the forum who use LV for ARM the most.
02-27-2013 03:51 PM
My work collegue and I were two of the people that wanted to use it, but then came across the many shortcomings. We were forced into using C for microcontroller porgramming and are happy with the outcome.
I used to be active on these forums last year and I only recalled you and one other person using LabVIEW for ARM beyond the investigatory stage.
04-03-2013 12:07 AM
Dear colleagues,
Please advise me what I need development board to start with LVEA ? And where can I buy it ?
04-03-2013 12:21 AM
Take a look at http://www.ni.com/labview/arm/. You can buy it online.
04-03-2013 02:00 AM
Thank you, but there are only three devices
04-03-2013 02:12 AM
That's it - only three Tier 1 Boards (actaully only two since the ARM7 offerings are similar). And the boards are over 6 years old.
04-03-2013 02:20 AM
so have to write on C
...Tell me please if I want to program 64 pulse width modulation outputs is what I have board for it?
04-03-2013 02:25 AM
64 pulse width modulation outputs is a lot of I/O. Are they all different? Do you need 64 pins just for I/O?
04-03-2013 02:31 AM - edited 04-03-2013 02:34 AM
Yes the PWM channels must be parameterized independently
no difference about 64 I/O, i.e. on the board could be anything