Motion Control and Motor Drives

cancel
Showing results for 
Search instead for 
Did you mean: 

USS protocol library

It shouldn't matter. You just have to set the inverter accordingly
LV 2011, Win7
0 Kudos
Message 31 of 64
(4,058 Views)

 

 

hi flo!!!

help please!!! 

how I can change P2012 and P2013 in mm440 or you uss library??? becouse I have error 5008(incorrect byte count) if baud rate 9600 or error 5007(missing STX) if baud rate 38400

 

 

 

 

 

0 Kudos
Message 32 of 64
(3,997 Views)

Is there a way to have these libraries in 8.5 LabView version please?

 

I am developing a project with some 420 and 440 drives, and it would be great to use this library.

 

Best regards,

Gilberto Garza

Gilberto Garza Gzz.
Certified LabView Developer
Asesor Electrico, S.A. de C.V.
0 Kudos
Message 33 of 64
(3,788 Views)

Dear Gilberto,

 

I have conerted the files Flo has posted to LabVIEW 8.5 format, I hope it will work for you. If it doesn't or if you have any other questions, please don't hesitate to ask.

 

Have a wonderful day!

Zenon Kuder
Applications Engineering
National Instruments
Message 34 of 64
(3,781 Views)

Thank you very much Zenon, it will help me a lot!

 

Best regards,

Gilberto Garza

Gilberto Garza Gzz.
Certified LabView Developer
Asesor Electrico, S.A. de C.V.
0 Kudos
Message 35 of 64
(3,771 Views)

Do you have the files available for LabVIEW 8.2?

0 Kudos
Message 36 of 64
(3,527 Views)

Dear Parga,

 

I converted the files for LabVIEW 8.2, nevertheless there were some changes in several of the used VIs, so I'm not sure if it will work for you. Can you please check and let me know if it did work or not?

 

Thanks you!

Zenon Kuder
Applications Engineering
National Instruments
0 Kudos
Message 37 of 64
(3,513 Views)

Dear Zenon,

Let me play with the files and my inverter for a couple of days and then I will let you know if I have troubles with them.

Thank you very much for your promptly support.

 

Regards,

Abraham Parga

0 Kudos
Message 38 of 64
(3,503 Views)

Thank you very much, I am working with the MM420 now and the PZD is max of 4 words, do I have to modify the vi PZD_USS.vi to make it work?

 

Best regards,

Gilberto Garza

Gilberto Garza Gzz.
Certified LabView Developer
Asesor Electrico, S.A. de C.V.
0 Kudos
Message 39 of 64
(3,068 Views)

The original library expects PZD=8. So you will have to dive into the code to alter it. Not sure about the altered llb intended for MM440 but if it now reads also 8 words, it will be same case.

LV 2011, Win7
0 Kudos
Message 40 of 64
(3,060 Views)