From Friday, April 19th (11:00 PM CDT) through Saturday, April 20th (2:00 PM CDT), 2024, ni.com will undergo system upgrades that may result in temporary service interruption.
We appreciate your patience as we improve our online experience.
From Friday, April 19th (11:00 PM CDT) through Saturday, April 20th (2:00 PM CDT), 2024, ni.com will undergo system upgrades that may result in temporary service interruption.
We appreciate your patience as we improve our online experience.
05-16-2012 12:42 PM
Hello,
I have an Ettus B100 unit that I would like to use in LabVIEW. All the USRP examples and VI files are looking for a IP address of the radio, but this model hooks up to the USB port, not via ethernet. Anyone have any experience hooking up this type of hardware?
Thanks,
Jay
05-16-2012 12:55 PM
Hi Jay,
The NI-USRP driver only works with the Ettus N2xx series and is not compatible with the B1xx series. You will not be able to use this device with NI-USRP and LabVIEW. If you would like more information about supported devices and daughter cards, this information is in the driver readme file.
10-20-2012 09:32 PM
Sarah,
The Ettus B100 spec sheet (attached) lists LabVIEW as a driver, do y'all offer some other LabVIEW driver besides NI-USRP?
Thanks,
Jim
10-22-2012 09:34 AM - edited 10-22-2012 09:36 AM
Hi Jim,
No, we do not offer another LabVIEW driver besides NI-USRP. Unfortunately, the documentation in the B100 data sheet is incorrect. It will corrected to prevent any further confusion.
12-02-2013 09:08 AM
I have the solution to use with labview b100 USRP, if still interested.
regards,
Manel.
02-18-2014 04:03 AM
Hi,
I am interested in the use of USRP B100 with LabView.
Could you help me?
Thanks for answer.
Claudio
11-21-2016 02:47 PM
Hi Manel,
I am interested in the use of B100 with LabView.
Please, could you help?
Thanks and regards,
Nizar
05-20-2018 12:16 PM
Hello
Any update on the b100 /LabView matter?
I wish to use the B100 with LabView but it is not supported.