NI Home > Community > NI Discussion Forums

Sound & Vibration Applications

Showing results for 
Search instead for 
Do you mean 
Reply
Member
ninjaphil
Posts: 24
0 Kudos

cRIO Reference Design for Vibration Data Logger

Please provide feedback, comments and questions on the cRIO Vibration Data Logger Reference Design in this thread.
Member
Levon_Sekoyan
Posts: 2
0 Kudos

Re: cRIO Reference Design for Vibration Data Logger

I am facing problem on the try to download the code. The hyperlink redirects me to a page where no sense of code exists.

Active Participant
preston_johnson
Posts: 520
0 Kudos

Re: cRIO Reference Design for Vibration Data Logger

The code is undergoing a minor revision, to update in support of the latest waveform reference design:  http://zone.ni.com/devzone/cda/epd/p/id/6206

 

Can you describe your need, perhaps we can get to you the needed code prior to the update completion. 

 

Preston Johnson
Principal Sales Engineer
Condition Monitoring Systems
Vibration Analyst III - www.vibinst.org, www.mobiusinstitute.com
National Instruments
preston.johnson@ni.com
www.ni.com/mcm
www.ni.com/soundandvibration
www.ni.com/biganalogdata
512-683-5444
Member
Levon_Sekoyan
Posts: 2
0 Kudos

Re: cRIO Reference Design for Vibration Data Logger

It would be kind of you to inform me as soon as you have the final version.

 

Thanks in advance.

 

Levon

Member
ba_0101
Posts: 20
0 Kudos

Re: cRIO Reference Design for Vibration Data Logger

Is the latest version available yet? The old version has been removed.

Active Participant
preston_johnson
Posts: 520
0 Kudos

Re: cRIO Reference Design for Vibration Data Logger

The latest version is located here:

http://zone.ni.com/devzone/cda/epd/p/id/6388

 

Please let us know what questions you have. 

 

 

Preston Johnson
Principal Sales Engineer
Condition Monitoring Systems
Vibration Analyst III - www.vibinst.org, www.mobiusinstitute.com
National Instruments
preston.johnson@ni.com
www.ni.com/mcm
www.ni.com/soundandvibration
www.ni.com/biganalogdata
512-683-5444
Member
D.Arunkumar
Posts: 7
0 Kudos

Re: cRIO Reference Design for Vibration Data Logger

Hi Preston Johnson

 

The download points to VIPM but there is no such toolkit available in VIPM.

 

Regards

D.Arunkumar

Thanks & Regards
D.Arunkumar
Founder & Chief Executive
Yashika Industries
3i, Vantage Plaza, #1 LB Road - MG Road Junction,
Thiruvanmiyur, Chennai - 600041
Mobile: +91 9840562844, Office:+91 4443532119, Mail: arun@yashikaa.in Web: www.yashikaa.in
Your technology partner for automation and test
Please DO NOT print this e-mail or attachment(s) unless it is absolutely necessary
Active Participant
preston_johnson
Posts: 520
0 Kudos

Re: cRIO Reference Design for Vibration Data Logger

look to the right on the page - there is a downloads box/section there with the VIPM and a document.

 

See the screenshot capture

 

Preston Johnson
Principal Sales Engineer
Condition Monitoring Systems
Vibration Analyst III - www.vibinst.org, www.mobiusinstitute.com
National Instruments
preston.johnson@ni.com
www.ni.com/mcm
www.ni.com/soundandvibration
www.ni.com/biganalogdata
512-683-5444
Member
pedrogon
Posts: 17
0 Kudos

Re: cRIO Reference Design for Vibration Data Logger

I try to use this example in a cRIO 9074 with a SAR module (I use the FPGA .vi in cRIO Waveform Library) and it does not work. 

The CPU usage is mantained at 100%, some seconds after the program is running on cRIO.

Is there any problem known in this example that could be fixed, or its possible that i'm the responsible for the malfunction?