05-20-2009 08:35 AM
I have this problem, for over a year it was working fine, now just crashing at start-up. I'm using Windows XP SP3. The error sound like this:
"LabVIEW SignalExpress has encountered a problem and needs to close. We are sorry for the inconvenience."
error signature:
AppName: signalexpress.exe AppVer: 3.0.0.3000 ModName: kernel32.dll
ModVer: 5.1.2600.5781 Offset: 00012afb
LOCALS~1\Temp\NI_ERRORLOG.TXT caused an Unknown exception type (0xe0434f4d)
in module kernel32.dll at 001b:7c812afb.
Exception handler called in Unhandled exception.
C:\Program Files\National Instruments\SignalExpress\SignalExpress.exe
Operating system: Windows XP (5.1.2600).
2 processor(s), type 586.
30% memory in use.
Context:
EDI: 0x00204a10 ESI: 0x09e0e8a4 EAX: 0x09e0e818
EBX: 0xe0434f4d ECX: 0x00000000 EDX: 0x0000012f
EIP: 0x7c812afb EBP: 0x09e0e868 SegCs: 0x0000001b
EFlags: 0x00000202 ESP: 0x09e0e814 SegSs: 0x00000023
Bytes at CS:EIP:
5e c9 c2 10 00 85 ff 0f 8e 36 93 ff ff 8b 55 fc
Module 1
C:\Program Files\National Instruments\SignalExpress\SignalExpress.exe
Image Base: 0x00400000 Image Size: 0x00087000
Checksum: 0x000737b3 Time Stamp: 0x48480af3
File Size: 536576 File Time: 6/5/2008 11:07:20
Version Information:
Company: National Instruments
Product: LabVIEW SignalExpress
FileDesc: LabVIEW SignalExpress
FileVer: 3.0.0.3000
ProdVer: 3.0.0.3000
I tried to repair still the same problem, i also restored my computer to an earlier restore point, still the same problem...
I moved entire MAX directory to desktop, no result...
Now, not even Measurement & Automation Explorer doesn't work... same error, crashing at start
I unistalled and reinstalled the whole LabView software, cleaned the registers and no change. I get the same error. LabView 8.6 work fine instead. What can i do? I don't want to format my hard drive...
Solved! Go to Solution.
05-26-2009 06:41 AM
Unfortunately formating was ultimate solution. That did it. Only the OS partition was formatted and reinstalled.
Now it's fully working.
I think the problem was with a software which deactivated the administrator rights (as I saw the same problem with user rights in Vista OS) .
So , it's solved! (kind of...).
09-01-2009 05:03 AM
Dear John,
so do I.
I have the same problem in the Signal Express 3.0 (limited edition) under Windows XP SP2 for my DAQ 6008-USB. The software runs fine until this past Friday, when I introduced the license code. From this moment, the software crashed all the time and an informative message advice me the same than you (Signal Express detected a problem and it has to be closed).
I reinstalled the Signal Express twice, and after the second reinstallation (maybe license code was deleted this last time) Signal Express worked OK. In order to discard options, I reintroduced the license code, AND THE PROBLEM REAPPEARED!
I would like if in your case, you also introduced your license before your problems started.
Best regards,
Juan Pablo RODRÍGUEZ
09-02-2009 12:05 AM
09-02-2009 01:28 AM
humm... Very interesting. Did you try to let the first program unaltered? In your case, the problem could come from some conflict between original software and the after-installed software.
In my case, the problem appeared inmediatelly after installing the license code. Yesterday I tried to contact with Sales person in charge of Barcelona area in order to find some solutions, but he is out of the office.
when I had a clear answer I will forward to you, may be it can be useful for you.
Many thanks for your quick answer John.
Best regards,
Juan Pablo RODRIGUEZ