02-09-2015 08:49 PM
Hi,
I have acquired the input and output of my DUT. Both of them are as time-wave (Voltage).
The input is from a function generator, and the output from a photodiode.
Now I want to obtaine the FRF and phase difference vetween these two waves, Does anyone know how can I do that?
Also, I have performed the sweep by the Function generator, too. so the input is Swept-freq.
I have attached the project (Sound and vibration toolkit)
Thanks
Petar
02-18-2015 10:54 AM
Hi Petar,
Regarding the FRF, you can add a step in SE called frequency response which can be found by navigating to add step>analysis>frequency domain measurements>Frequency Response.
Here is a KB that discusses how to determine the phase difference between two signals in SE:
http://digital.ni.com/public.nsf/allkb/F4BB644ECCA595D886256FFE00722E29
I hope that helps!
Regards,
Jayk
02-18-2015 03:23 PM
Thanks, it was really helpful.
Petar2015