SCB-68 direct feedthrough

[tben60]

I have an SCB-68 interface box and have configured it for direct feedthrough mode. I just want to make sure I've set the switches properly.

Here is how the switches were when I first opened the cover:

and here is how it looks after I modified the switch settings:

Did I configure the switches properly for direct feedthrough mode?

Thanks

[Tim]

[Dennis_Knutson]

Matches the instructions in the manual, doesn't it?

http://digital.ni.com/manuals.nsf/websearch/B75ED10F9E70577E86257582004EC0EB

[tben60]

My concern was the image in the manual had the switch lettering S1 and S2 on the right side of the switches, not the left like on the SCB-68 board. There is a slight discrepancy there so I just wanted to be sure.

[User002 · Accepted solution]

The S1 & S2 in the manual refer to the same switches even though the letters on the other side of the switch.