08-12-2015 01:43 PM
Hello,
We have a three wire strain gage (red, white, black) and we are trying to connect it to the SCXI-1314 module. I was hoping somebody could say the proper way to do so.
Thanks
08-13-2015 09:03 AM
Hello,
Please take a look at this terminal block installation guide, in addition to some additional resources to help you along the way with your application:
http://www.ni.com/pdf/manuals/322859a.pdf
http://www.ni.com/white-paper/4172/en/
http://www.ni.com/white-paper/3642/en/
Thanks,