From Friday, April 19th (11:00 PM CDT) through Saturday, April 20th (2:00 PM CDT), 2024, ni.com will undergo system upgrades that may result in temporary service interruption.
We appreciate your patience as we improve our online experience.
From Friday, April 19th (11:00 PM CDT) through Saturday, April 20th (2:00 PM CDT), 2024, ni.com will undergo system upgrades that may result in temporary service interruption.
We appreciate your patience as we improve our online experience.
09-19-2006 02:24 AM
09-19-2006 11:03 PM
09-19-2006 11:22 PM - edited 09-19-2006 11:22 PM
Hope i did not make you more angry
These are rs 232and rs 485 serial communication devices
Read this link for an overview and start going to subsequent links from that page.
Also this link may help
and if you plan to code in LabVIEW, go to find examples and execute a search for rs 232 and rs 484 example vi's
any doubts, do ask
Message Edited by devchander on 09-19-2006 11:24 PM
Message Edited by devchander on 09-19-2006 11:25 PM
09-21-2006 08:53 AM
09-21-2006 10:24 PM - edited 09-21-2006 10:24 PM
Here are some example codes in LabWINDOWS for setting serial port properties.
To find all other examples in your LabWINDOWS, refer this link
Message Edited by devchander on 09-21-2006 10:24 PM
09-24-2006 07:52 PM
Good morning
I am very appreciate for your reply
The example codes in LabWINDOWS for setting serial port properties is very usefull to me
but i have another question
how can i measure the time between two data arrive at the serial port buffer?
Thank you