NI Home > Community > NI Discussion Forums

NI TestStand

Showing results for 
Search instead for 
Do you mean 
Reply
Member
Vincent90
Posts: 115
0 Kudos

How to personalize your generation report ?

Hi,

 

How to personalize your generation report ?

I want to make group/ungroup report.

Like

      +Robot1 PASS/FAIL

              +DI    PASS/FAIL

                         DI0  PASS/FAIL

                         DI1  PASS/FAIL

                         ...

                         DIn

              +DO  PASS/FAIL

 

Anyone got an idea about that kind of generation report ?

 

Best regards

Vincent

Active Participant
Rodéric
Posts: 1,181
0 Kudos

Re : How to personalize your generation report ?

Hi,

 

The best way (from my point of view) would be to override the test report callback. Then create a custom report using LabVIEW steps.

 

Another way would be to Browse the resultlist container to extract the needed infos.

 

Hope this helps,

Rodéric L
Certified LabVIEW Architect
Member
Vincent90
Posts: 115
0 Kudos

Re : How to personalize your generation report ?

Hi Rodéric,

 

Can you explain further how to create a custom report using Labview steps ? Is it working with .ini files ?

I am barely new in that Test Stand programming so forgive me my lack of knowledge.

 

BR,

Vincent

Active Participant
DavidS.
Posts: 226
0 Kudos

Re : How to personalize your generation report ?

Hi Vincent,

 

I think you could use the step "Additional Results" in your sequences to customize your report.

 

Hope this help.

 

Sincerely

David S.| Certified LabVIEW Associate Developer
National Instruments France


Journées Techniques LabVIEW 2012 : du 27 septembre au 22 novembre
2 sessions en parallèle : Débuter a...

Member
Vincent90
Posts: 115
0 Kudos

Re : How to personalize your generation report ?

Hi David,

 

I don't have hard yet to test that but it seems to fit my application. I let you know.

 

In Configure/Report Option i set up the following stylesheet ; expand.xls

That allows me to check my PASS/FAIL Sequnces in the format description above.

 

In my report i want to keep only my final test ; card is ok/nok. How to delete "if loop" pass/fail or "message" pass/fail report generation ?

 

BR,

Vincent

Active Participant
Rodéric
Posts: 1,181
0 Kudos

Re : How to personalize your generation report ?

There is a check box called "Record results?" for each step.

Rodéric L
Certified LabVIEW Architect
Member
Vincent90
Posts: 115
0 Kudos

Re : How to personalize your generation report ?

Yes indeed, for each addtional results set up.

But the basic report contain If loop report. I want to delete them in order to display only card PASS/FAIL.

 

You can find attached the kind of report Test Stand provides. As i don't have my hard yet. The report should display nothing. Here it is checking if If loop have passed or failed. I don't want that in my report generation.


BR

Vincent

Member
Vincent90
Posts: 115
0 Kudos

Re : How to personalize your generation report ?

Hi, I found the answer !

 

You click on your step/properties/Run Options/disable Record result

I have a last question, how does the template window work ? Seems you have to import .ini files but what for, what is the use ?

 

BR

Vincent

Active Participant
~jiggawax~
Posts: 1,363
0 Kudos

Re : How to personalize your generation report ?

Templates are used to store a step or variable or sequence that you will want to use repeatedly. 

 

For instance I always create a Statement Step.  Then I turn off the record results (as you have figured out).  Then I place that in my templates.  Then the next time I use a Statement Step I pull it from my templates.  That way I don't have to keep turning off the record results.  It is very rare that I record a Statement Step.

 

Hope this helps,

jigg
CTA, CLA
teststandhelp.com
~Will work for kudos and/or BBQ~
Member
Vincent90
Posts: 115
0 Kudos

Re : How to personalize your generation report ?

Hi Jigg,

 

Thank you very much for that feedback.

Test Stand begin to be more and more familiar to me.

 

Is there a way to get a report which fill in automatically, PASS / FAIL / NOT TESTED YET

The cabinet i am working on got 4 controllers with 20 cards on each. (80 cards on the entire cabinet, 960 I/O)

I need that kind of functionality in order to be sure all I/O have been tested.

Any idea about this (using expand/collapse graphical viewer)?

 

BR

Vincent