NI Linux Real-Time Discussions

cancel
Showing results for 
Search instead for 
Did you mean: 

how to change wireless mode for myRIO

Solved!
Go to solution

Hi,
iam using MyRIO 1900 that have WIFI , i have problem with the WIFI

 

when i connect myrio through usb i can not change any thing on it, in wireless adapter wlan0 the wireless mode always disable i dont have any option ti change it  why ?

how to enable the wifi ?
so i can change the mode of it

0 Kudos
Message 1 of 20
(6,221 Views)

First and foremost, welcome!

 

Next in order of importance is that this sort of issue is likely best served on the official NI support forums, not the community forums (http://forums.ni.com/t5/Discussion-Forums/ct-p/discussion-forums, the RT subsection under LabVIEW).

 

Next, what version of LVRT and RIO are you using with your myRIO 1900?

 

Finally, what software interaction/installation/shell interaction (e.g. through MAX, ssh, or the serial console) have you done with the target?

0 Kudos
Message 2 of 20
(6,193 Views)

Thank you for your response

I am using vesion 15.0, with NI-MAX

I hope that will help

0 Kudos
Message 3 of 20
(6,183 Views)

Well, I don't know what to tell you other than "works for me". Try formatting your target and trying again.

 

From a 2015 stack:

 

myrio_wifi1.jpg

myrio_wifi2.jpg

0 Kudos
Message 4 of 20
(6,169 Views)

i already format it but nothing change
as you can see in the pic i don't even have any chance to change the option

 

0 Kudos
Message 5 of 20
(6,167 Views)

even if i try to change the country it gave me error Capture.PNG

0 Kudos
Message 6 of 20
(6,166 Views)

Enable either the ssh shell or serial console, log into the target, post the results of running the command ip link show

0 Kudos
Message 7 of 20
(6,158 Views)

where i have to enter that command ?

0 Kudos
Message 8 of 20
(6,155 Views)

Please see: How Do I Access the Shell on a NI Linux Real-Time OS Device?, and run the command from the myRIO's shell.

0 Kudos
Message 9 of 20
(6,147 Views)

here is the result , so what i have to do after that ?Capture.PNG

0 Kudos
Message 10 of 20
(6,138 Views)