Benchtop Measurement and Test
Distributed Measurement and Control
High-Performance Test
Systems Engineering Software
Perspectives showcases how NI sees what’s next in the world of test and technology.
You can request repair, RMA, schedule calibration, or get technical support. A valid service agreement may be required.
Provides support for NI data acquisition and signal conditioning devices.
Provides support for Ethernet, GPIB, serial, USB, and other types of instruments.
Provides support for NI GPIB controllers and NI embedded controllers with GPIB ports.
修改时间 06-05-2016 09:31 AM
请问:我使用的是pXI6624,为什么采集编码器数据时,要接个外部时钟源?不是有内部时钟吗?这个外部时钟源怎么接?接哪个引脚?
修改时间 06-06-2016 07:55 AM
PXI 6624是提供板载时钟的,分别是100 kHz and 20 MHz;‘如果想外接时钟源的话,就把外部时钟源接到counter的source端,编码器的信号接到gate端就可以了。
修改时间 06-06-2016 09:00 AM
为什么6624上的范例和MAX上的创建的任务都只能接外部时钟不能接内部时钟了?外部时钟,我从哪搞啊?
修改时间 06-06-2016 09:02 AM
或者怎么接到它的内部时钟?还请帮帮忙再回复我一下,谢谢!!!
修改时间 07-18-2018 10:15 PM
我也遇到同样的问题,我用的是6358,创建编码器采集时只能选外部时钟,外部时钟我选了模拟量输入的采样时钟(我同时用的16个通道的模拟量采集),实际采集的时候到时能和模拟量采集同步,但是采集的位置信息往一个方向飘,存在明显的丢数情况。编码器频率在400K左右,不知道有什么解决方法?
What do you need our team of experts to assist you with?
Thanks!
We'll be in touch soon!