Benchtop Measurement and Test
Distributed Measurement and Control
High-Performance Test
Systems Engineering Software
Perspectives showcases how NI sees what’s next in the world of test and technology.
You can request repair, RMA, schedule calibration, or get technical support. A valid service agreement may be required.
Provides support for NI data acquisition and signal conditioning devices.
Provides support for Ethernet, GPIB, serial, USB, and other types of instruments.
Provides support for NI GPIB controllers and NI embedded controllers with GPIB ports.
From Friday, April 19th (11:00 PM CDT) through Saturday, April 20th (2:00 PM CDT), 2024, ni.com will undergo system upgrades that may result in temporary service interruption.
We appreciate your patience as we improve our online experience.
修改时间 08-01-2013 08:28 PM
我没有NI硬件,NI-DAQmx驱动已装,想在max下创建仿真DAQ设备,步骤如下:打开max-右键“设备与接口”-新建-仿真NI-DAQmx设备或模块化仪器。然后出来正在搜索窗口,NI-DAQmx仿真设备却没有出现!!!重启之后还是不行,请问大神有遇到过这种情况吗?该怎么解决呢,我急啊!
修改时间 08-01-2013 08:29 PM
忘了上截图了
修改时间 04-30-2016 11:58 PM
要创建一个9219的采集卡的虚拟通道 在设备与接口里右击创建,选择仿真,9219,然后创建任务,选生成信号的电流,显示未找到支持设备,为什么?
修改时间 05-03-2016 02:21 AM
Hi,
不知道您之后会如何使用实际的板卡,一般情况我们会把9219放在一个cdaq机箱里使用,所以您可以试试看先创建一个虚拟的cdaq机箱(如9174),然后,再在这个虚拟的机箱里配置一块9219,就能在系统里看到虚拟的通道了。
What do you need our team of experts to assist you with?
Thanks!
We'll be in touch soon!