11-28-2010 03:28 AM
Not getting the actual response or have a problem to turn ONN the Diac,Triac and SCR.
And how can i get the SCS symbol for Multisim 10.0?
Solved! Go to Solution.
11-29-2010 10:33 AM
Hi,
Can you post the circuit file you created, maybe we can find the problem if we look at your circuit.
If you want to create the SCS symbol, place a SCR on the work area, double click on it and click on Edit Component in db>>Symbol>>Edit, you should be in the Symbol Editor and in here you can draw anything you want. Once you finished drawing the symbol select File>>Exit to get out of the Symbol Editor. Select the General, Model and Footprint tab, make any necessary changes to this component and then click on the OK button to save this part to your database.
For a complete component creation tutorial you can have a look at this link:
http://zone.ni.com/devzone/cda/tut/p/id/3173
12-02-2010 11:33 AM
Plz consider this Fan controlling circuit and trouble shoot it if possible.
12-02-2010 11:36 AM
Please consider the my circuit of Fan controlling By using DIAC and TRIAC.If possible trouble shoot it.
12-06-2010 09:58 AM
Hi Norman,
I assume you are having convergence error and in this case, you can change the following settings and your circuit should simulate. From the main menu select Simulate>>Interactive Simulation:
1. Under the "Default for Transient Analysis Instruments" tab, click on the drop down menu under "Initial Condition" and select "Set to zero".
2. For "Tmax" change the setting from 1e-5 sec to 0.0001
3. Click the "Analysis Options" tab, then "Customize" button, under "Transient" tab, change " the method to "Gear".
12-12-2010 02:35 AM
Plz guide me that how can i can get the transcient response of the snubber ckts of SCR??.And how I can generate the impulsive source for transcient?