Multisim and Ultiboard

Showing results for 
Search instead for 
Did you mean: 
Reply

Custom Labview Instrument with Multisim

Solved!
Go to Solution

Custom Labview Instrument with Multisim

Hi,

I want to use a custom Labview Instrument (Phasor_Diagram) with Multisim 13.0:

http://www.ni.com/example/30200/en/

I copied Phasor_Diagram.llb and the folder Phasor to C:\Program Files\National Instruments\Circuit Design Suite 13.0\lvinstruments but

I can't find the Phasor Labview Instrument in my Multisim.

What is going wrong? How to get this work?

 

Regards Peter Stolz

 

0 Kudos
Message 1 of 12 (3,654 Views)
Reply
0 Kudos

Re: Custom Labview Instrument with Multisim

Hi Peter,

 

You may have to restart Multisim but it should be in Simulate»Instruments»LabVIEW Instruments.

 

 

Tien P.

National Instruments
0 Kudos
Message 2 of 12 (3,650 Views)
Reply
0 Kudos

Re: Custom Labview Instrument with Multisim

Hi Tien,

 

I have restart Multisim. But I can't find the Phasor_Diagram Instrument in Simulate»Instruments»LabVIEW Instruments.

 

Regards Peter Stolz

0 Kudos
Message 3 of 12 (3,647 Views)
Reply
0 Kudos

Re: Custom Labview Instrument with Multisim

Hi Peter,

 

Do you see other LV instruments that was installed with Multisim?

 

You should be able to put the .llb and the Phasor folder in the program files, but there is another place, I extracted the zip file to:

C:\Users\Public\Documents\National Instruments\Circuit Design Suite 13.0\LVInstruments

 

if you are using an older OS, it goes to docuement and settings:

C:\Documents and Settings\All Users\Documents\National Instruments\Circuit Design Suite 12.0\LVInstruments

Tien P.

National Instruments
0 Kudos
Message 4 of 12 (3,640 Views)
Reply
0 Kudos

Re: Custom Labview Instrument with Multisim

Hi Tien,

 

yes, I see BJT Analyzer, Impedance Meter, Microphone, Speaker, Signal Analyzer, Signal Generator and Straming Signal Generator.

 

I extracted the zip file to: C:\Users\Public\Documents\National Instruments\Circuit Design Suite 13.0\LVInstruments

 

But I can't find the phasor_diagramm instrument in Multisim.

 

Peter Stolz

0 Kudos
Message 5 of 12 (3,635 Views)
Reply
0 Kudos
Solution
Accepted by topic author stolzpet
‎08-27-2015 06:09 PM

Re: Custom Labview Instrument with Multisim

Hi Peter,

 

It looks that phasor instrument was built using an old LabVIEW version, I rebuit it in LabVIEW 2013.

Tien P.

National Instruments
0 Kudos
Message 6 of 12 (3,597 Views)
Reply
0 Kudos

Re: Custom Labview Instrument with Multisim

Hi Tien,

 

now it works!

 

Thanks a lot!

 

Peter Stolz

0 Kudos
Message 7 of 12 (3,577 Views)
Reply
0 Kudos

Re: Custom Labview Instrument with Multisim

I have same problem. How can I rebuit in LabVIEW?

0 Kudos
Message 8 of 12 (3,074 Views)
Reply
0 Kudos

Re: Custom Labview Instrument with Multisim

HI Maxics,

 

You can open the instrument .llb you downloaded in LabVIEW Project Manager and then rebuilt it.  Here is a knowledge base how to build a llb file in LabVIEW:

http://digital.ni.com/public.nsf/allkb/E698CCDF9DB336D78625711800762EC0

 

If you have a problem, let me know which instrument.

Tien P.

National Instruments
0 Kudos
Message 9 of 12 (3,072 Views)
Reply
0 Kudos

Re: Custom Labview Instrument with Multisim

Hi Tien,

I have not get success

this tool: https://decibel.ni.com/content/docs/DOC-28563

0 Kudos
Message 10 of 12 (3,058 Views)
Reply
0 Kudos