NI-DAQmx Error Modul_ad.c

[Lars3112]

Hello all,

I'm trying to record an acoustic signal in Dasylab 10.0.1 with the NI-DAQmx 6210.

System: Windows XP SP3

Board: NI-DAQmx 6210 with USB

MAX configuration:

Sampling rate: 32768

Samples: 32768

Connection: RSE

After an hour I received an error message:

NI-DAQmx Analog Input: AnalogIN_0-3

file: Modul_ad.c, row:2205

I already deleted the old and created a new task, but it didn't change anything. In addition I already tried to set the configurations back to factory settings and start up new.

Does anyone have the same problem or an idea to solve it?

Best regards,

Lars  

[Dominik55]

Hello, 

here is Dominik from the AE's in Munich. 

At first i want to know what DAQmx driver version you use. You can find the version in your MAX (Measurement & Automation Explorer).

Perhaps you can add a screenshot of your error message. 

Thank you 

Best regards

Dominik 

[Lars3112]

Hello Dominik,

thanks for you reply. I'm useing the DAQmx 8.6.0f6 driver version. In addition I added an screenshot of the error message.

Best regards from Dortmund,

Lars

[Dominik55]

Hello Lars, 

I found out that the USB-6210 needs the DAQmx 9.6 driver. 

You can see it here: 

NI-DAQmx and NI-DAQ Driver Support: Portable Devices

http://www.ni.com/white-paper/6913/en/

Perhaps the problem is caused by the driver. Please try to deinstall your driver first then download the new driver and install it. 

You can find the DAQmx 9.6 here :

NI-DAQmx 9.6 - Windows 7 64-bit/7 32-bit/Vista 64-bit/Vista 32-bit/XP 32-bit/Server 2008 R2 64-bit/Server 2003 R2 32-bit

http://www.ni.com/download/ni-daqmx-9.6/3423/en/

I hope it solves your problem.

Best regards

Dominik 

[Lars3112]

Hello Dominik,

Sorry for late reply.

Finally I bought a new PC and updated the driver and software to the current version.

Thanks for you help and best regards,

Lars