Multifunction DAQ

[Vinod_3490]

I am using the DAQ 6281 for the first time. I need to acquire the data from it and save it into the Excel format. I want to connect the keithley 2306 battery simulator with the DAQ 6281. Can anyone help me how to make the setting work...

[Christian Mergl]

---

Vinod 3490 wrote:

.....

Can anyone help me how to make the setting work...

---

Sure! This forums intention is to help people using National Instruments Products!

Christian

[Vinod_3490]

Hi Christian,

                  Can you give me a description of how to use the Keithley 2306 Battery simulator with the NI 6281 DAQ module. The main problem is about Keithley interfacing with the DAQ.

[Dennis_Knutson]

What exactly are you trying to do? Just measure the output voltage of the Keithley? The output current?

[Vinod_3490]

We need to connect the Keithley to a mobile, need to note down the voltage and current of the mobile using DAQ.

[Dennis_Knutson]

I'm not sure why you would use a DAQ card instead of a GPIB interface to the Keithley.

The 6281 can only measure voltage so you would use one channel for the voltage and then measure the voltage drop across a known shunt resistor and calculate the current.

[Christian Mergl]

---

Dennis_Knutson wrote:

I'm not sure why you would use a DAQ card instead of a GPIB interface to the Keithley.

... 

---

Maybe they don't have a GPIB device available to interface the Keithley instrument.

Christian