May I Know wiring configuration bet. DAQ-ai-16e-4 and SCB-68 I/O block

[rajesh.patel@marwadieducation.edu.in]

We have the 'DAQCard-AI-16E-4' with PSHR 68 68 cable and a scb-68 connector block to connect the signals to this daq card. and also NI-DAQ software.

May I know the wiring configuration between DAQCard-AI-16E and scb-68.
Kindly provide me detail wiring configuration between that two. and also application note if any for perticular this card with Laptop connection.

Thanking You,

[Swapnil]

Hello,
Please find attached a file in the bmp format that gives the pin-out diagram for the PSHR68-68M cable (PSHR68-68 is a shielded cable kit that contains a PSHR68-68M cable).

You can also get the same pin-out diagram from National Instruments website if you go to the following link and type '2XIH98R9' in the search box.
http://search.ni.com/?layout=KB


Here's the webpage for PSHR68-68 and you can find more information about it here in the Product Data Sheet.
http://sine.ni.com/apps/we/nioc.vp?cid=11808〈=US

This DAQCard has 16 AI channels, 8 DIO lines and 2 counters. These can be located in the diagram for the PCMCIA end (DAQCard-AI-16E-4) as well as the SCB-68 connector end, alongwith GND lines.


I hope this answe
rs your question. Please let us know if you have further questions. Thank you for choosing National Instruments !


Swapnil P.
National Instruments Engineer