Internal clock to CLOCK OUT

[stefanox]

I have been working with a NI 5122 (but not for a long time) and I have tried to make the 100MHz internal clock avilable on the Diagram Block. After performing a decimation I would like to send to the CLOCK OUT plug this synchronization signal. The aim is synchronize with the DAQ an external device which generate a signal that then after a certain delay will be sampled by the DAQ itself.

Can anybody who has previously experienced this topic please give me a hint?
Thanx for your help

Stef

[AlessioD]

Stef,

refer to the following link for the answer

http://forums.ni.com/ni/board/message?board.id=250&message.id=8635

Regards,

AlessioD
National Instruments