Multifunction DAQ

cancel
Showing results for 
Search instead for 
Did you mean: 

Error 200220 with CRIO 9081 and DAQ modules

Solved!
Go to solution

Hello,

I'm trying to use a CRIO 9081 with the modules NI9206. Max recognize the chassis but not the module.

When i try to add a DAQ associated to the NI9206 in Veristand, the error message 200220 it appears.

 
I was careful to use the same hardware names under MAX and Veristand but it does not work.
Do you have an idea to resolve the problem ? 
 
captureMax.png
Download All
0 Kudos
Message 1 of 6
(4,197 Views)

Hi vincentlg,

and how are you accessing the channels? Do you use a task or you access the physical channels directly?

0 Kudos
Message 2 of 6
(4,165 Views)

Hi,

I try to access the physical channels directly, juste by adding a DAQ in the system explorer to get an analogic input.

The modules are connected but Veristand but he mentions that the device is invalid...

0 Kudos
Message 3 of 6
(4,158 Views)

And is the project properly configured?

You can see the guidelines here (most important is the OS and IP): http://www.ni.com/tutorial/14126/en/#toc2

0 Kudos
Message 4 of 6
(4,150 Views)
Solution
Accepted by topic author vincentlg

I find the solution, finaly it was necessary to add a custom device to scan for new engine and to detect the modules. Then it's possible to interact with modules.

Thank you for your help !

 

0 Kudos
Message 5 of 6
(4,145 Views)

Great!

Have fun 🙂

0 Kudos
Message 6 of 6
(4,142 Views)