Multifunction DAQ

cancel
Showing results for 
Search instead for 
Did you mean: 

Connecting a cDAQ-9178 to a cRIO-9081

Solved!
Go to solution

I want to connect a cDAQ-9178 chassis to a cRIO-9081USB port.

 

The cRIO-9081 has Windows Embedded 7 on it.  I have written a LabVIEW FPGA program that gets loaded into the cRIO's FPGA.  Once the FPGA is started, the FPGA basically ignores the Windows side, very minimum data exchange. 

 

I want to use the WIndows side to run a cDAQ program.  I have to do it this way because the cRIO has 7 modules in it and the cDAQ has 7 modules.

 

Whenever I insert the NI-DAQmx 14.5 CD into a CD drive on the cRIO, I only see the cRIO drivers.  How do I get  the cDAQ drivers installed?

0 Kudos
Message 1 of 2
(4,071 Views)
Solution
Accepted by topic author Paul_Knight_Lockheed_Mart
I was able to work around the problem by copying the DAXmx to a USB thumb drive and installing from there.
Message 2 of 2
(4,034 Views)